Godox LT1 Smart Creative LED Pixel Light

,Godox LT1 Smart Creative LED Pixel LightThe Godox LT1 Smart Creative LED Pixel Light is a compact pixel light with an RGB LED matrix that sits on the camera hot shoe as a cover and doubles as an on/off switch for a group of Godox lights.HighlightsRGB pixel display with images, GIFs and scrolling textCustom pixel art through the Godox Light appOne button press switches a whole group of Godox lights on or offBluetooth with NFC for instant pairingMounts on the hot shoe, on a magnetic surface or with a strapRuntime of approximately 3 hours 10 minutesPixel display with custom designsThe front carries an RGB pixel display with a built in library of images, GIFs and scrolling text. The Godox Light app also allows custom pixel art, including custom GIFs and text. GIFs and scrolling text support up to 10 frames.One press for a whole light groupIn the Godox Light app, Godox lights are grouped into a scene together with the LT1. In light control mode, the control button on the LT1 then switches the entire group on or off at once, without unlocking the phone. The connection stays in place after closing the app or restarting the lights, and only drops when the Bluetooth connection is reset. The LT1 switches on and off only; settings such as power and colour remain in the app. The lights being controlled need Bluetooth firmware version 66 or later.Pairing over Bluetooth or NFCThe LT1 connects to the Godox Light app over Bluetooth with a range of up to 15 metres. The built in NFC area also allows pairing with a tap of the phone. Firmware updates run through the app as well.Several LT1 units in the same sceneUp to three LT1 units can be added to the same scene, so several people on set can switch the same lights. In the same space, separate LT1 units can also be assigned to different scenes, which do not interfere with each other.Mounting and powerThe underside carries a cold shoe foot that slides into the camera hot shoe; this foot is purely mechanical and has no electronic contacts. A magnetic area is also built in, holding the LT1 on ferrous surfaces, and with the separately available Godox RS LT1 Rubber Strap for LT1 it goes on the arm or on a bag. The built in battery lasts approximately 3 hours 10 minutes and charges over USB C, with the LT1 remaining usable while charging. Below 10% charge the display switches to the battery screen and flashes three times.,

Type: pixel light with RGB LED matrix and cold shoe foot
Model: LT1
Display: RGB pixel display with built in library (images, GIFs, scrolling text)
Custom content: pixel art, GIFs and scrolling text through the Godox Light app, up to 10 frames
Control: app and buttons on the unit (function button and light control button)
Light control: on/off of a grouped scene of Godox lights (no settings)
Required firmware of controlled lights: Bluetooth firmware version 66 or later
Number of LT1 units per scene: maximum 3
Connection: Bluetooth, range up to 15 metres, with NFC area for fast pairing
Mounting: cold shoe foot (without electronic contacts), magnetic area or strap
Battery: lithium ion, 3.7V, 400mAh, 1.48Wh (built in)
Runtime: approximately 3 hours 10 minutes
USB C input: 5V, 1A, usable while charging
Working environment: 10 °C to 40 °C
Dimensions: 37 x 27 x 48 mm (excluding accessories)
Net weight: approximately 37 g (excluding accessories)
Not water or dust resistant
Optional accessories: Godox RS LT1 Rubber Strap for LT1
Warranty: 2 years (battery 1 year)
,1 x Light Body1 x USB C Charging Cable1 x Instruction Manual