Tilta Nucleus Nano Motor

Tilta Nucleus Nano Motor

The Nucleus-o is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The o system is compatible with all DSLR, mirrorless, and modified “cine-style” vintage photo lenses!

The Nucleus-o uses a brand new state of the art power-efficient miniature motor. The o Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.

The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately).

The o Motor has its own built-in motor drive that communicates directly with the o Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the o Motor and o Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the o Hand Wheel Controller and o Motor is 300 feet!

The motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the o Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-o Motor at 5.5V is 0.65N·m and at 14.8V is 1N·m

The o Motor is also able to connect to the Nucleus-M’s FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit.

Lastly, the o system can provide record Run/Stop functionality for numerous camera systems through several different cables we offer for the system.

** PLEASE NOTE: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-o since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M or Nucleus-o. Only use cables that have been developed by us exclusively for the Nucleus-o system.