Godox LiteFlow reflector 100cm Kit with Flight Case K1B
Fylgdu þessari vöru og við látum þig vita þegar hún kemur aftur á lager.
Godox LiteFlow reflector 100cm Kit with Flight Case K1B
,Godox LiteFlow reflector 100cm Kit with Flight Case K1BThe Godox LiteFlow reflector 100cm Kit with Flight Case K1B consists of two double sided mirrored reflector panels of 100 by 100 cm, each in its own yoke, in a flight case. One panel carries versions D1 and D3, the other D2 and D4, so you have all four light characters to hand by turning the panel over. This size lifts a whole set without putting a second fixture there.
Highlights
Two double sided panels of 100 x 100 cmD1 and D3 on one panel, D2 and D4 on the otherOnly 3 percent light loss on the bounceA yoke per panel, so you lock the angleWeighs 18.12 kg per panelFC04 flight case for transport
The four versionsD1 gives hard light and extends the light path so it falls off naturally. D2 spreads direct light and redirects it. D3 gives soft, natural shadows and is the one for fill. D4 pulls the beam into a strip. Because the panels are double sided, you change character by turning the panel around.
How it worksA panel bounces the light back with roughly 3 percent loss, so you keep almost all the output. Aim a parallel source at it and the angle decides where the light lands. At this size that is enough to light a set or a whole wall.
Setting upEach panel sits in a yoke that sets and locks the angle. At 18.12 kilos per panel it wants a solid stand underneath. The FC04 flight case keeps both panels and the yokes together in transport.,Type: Reflector panel setNumber of panels: 2, double sidedVersions: D1 and D3 on one panel, D2 and D4 on the otherDimensions per panel: 100 x 100 cmLight loss: approximately 3 percentFrame: a yoke per panelWeight per panel: 18.12 kgTransport: FC04 flight caseWarranty: 2 years,1 x Godox double sided LiteFlow 100, D1 and D31 x Godox double sided LiteFlow 100, D2 and D42 x yoke1 x Godox FC04 flight case
Highlights
Two double sided panels of 100 x 100 cmD1 and D3 on one panel, D2 and D4 on the otherOnly 3 percent light loss on the bounceA yoke per panel, so you lock the angleWeighs 18.12 kg per panelFC04 flight case for transport
The four versionsD1 gives hard light and extends the light path so it falls off naturally. D2 spreads direct light and redirects it. D3 gives soft, natural shadows and is the one for fill. D4 pulls the beam into a strip. Because the panels are double sided, you change character by turning the panel around.
How it worksA panel bounces the light back with roughly 3 percent loss, so you keep almost all the output. Aim a parallel source at it and the angle decides where the light lands. At this size that is enough to light a set or a whole wall.
Setting upEach panel sits in a yoke that sets and locks the angle. At 18.12 kilos per panel it wants a solid stand underneath. The FC04 flight case keeps both panels and the yokes together in transport.,Type: Reflector panel setNumber of panels: 2, double sidedVersions: D1 and D3 on one panel, D2 and D4 on the otherDimensions per panel: 100 x 100 cmLight loss: approximately 3 percentFrame: a yoke per panelWeight per panel: 18.12 kgTransport: FC04 flight caseWarranty: 2 years,1 x Godox double sided LiteFlow 100, D1 and D31 x Godox double sided LiteFlow 100, D2 and D42 x yoke1 x Godox FC04 flight case