Kupo KCP-712 Wall Spreader Set for Pipe 1-1/2"""" Schedule 40

Kupo KCP-712 Wall Spreader Set for Pipe 1-1/2" Schedule 40 – secure mounting for background supports and overhead beams

This wall spreader set fits 1-1/2" round pipe and provides a solid mounting point for background supports or overhead beams. You install the pipe into the spreader ends and then tighten the hardware to achieve a firm fit to the wall.

Key uses and applications

Use the Kupo KCP-712 where you need a rigid connection between two fixed points. Typical applications include:

• Background support systems
• Overhead beams for hanging lighting fixtures by rigging 1-1/2" round pipe

Features

The product design focuses on straightforward installation and flexible positioning. Notable features include:

• Compatible with 1-1/2" pipe, supplied as schedule 40 with an outer diameter of 1.9" (48.3 mm)
• Also stated as fit for 1-1/2" schedule 20, which has the same outer diameter of 1.9" (48.3 mm)
• Can be used in both horizontal and vertical positions to match different rigging layouts
• Install by placing the pipe into the wall spreader ends and adjusting the bolt or stifts to ensure a tight fit to the wall
• Made of solid steel for a robust connection

How to install

Place the cut pipe into the spreader ends, position the assembly between the two rigid points, and then adjust the bolt so the spreader seats firmly against the wall. Additionally, adjust the stifts where present to eliminate play and secure the pipe in place. This simple sequence provides a dependable mounting for your background or lighting rig.

Specifications

FAQ

Question: Which pipe sizes work with the Kupo KCP-712?
Answer: It is designed for 1-1/2" round pipe. The product is described as coming with 1-1/2" schedule 40 (OD 1.9" / 48.3 mm) and is also noted as fit for 1-1/2" schedule 20 with the same outer diameter.

Question: Can I mount the spreader horizontally and vertically?
Answer: Yes. The spreader can be used in both horizontal and vertical positions to suit different rigging and support layouts.

Question: How do I secure the pipe once it is placed in the spreader?
Answer: Place the pipe into the spreader ends, then adjust the bolt to tighten the spreader to the wall. Additionally, adjust the stifts where provided to ensure a snug, secure fit.

Question: What material is the wall spreader made from?
Answer: The KCP-712 is made of solid steel, providing a durable connection for background and lighting support applications.