Kupo KS-525 1-7/8"""" (O.D.) 48mm X10""""(250mm) Long Aluminum Tube w/ Double

Kupo KS-525 1-7/8" (48mm) x 10" (250mm) Aluminum Tube – Double 3/8”-16 Female Thread for Vehicle Rigging

This Kupo KS-525 aluminum tube provides a compact, threaded mounting solution primarily designed for vehicle rigging. It features a 1-7/8" outer diameter (48mm) and a 10" (250mm) overall length, and includes double 3/8”-16 female threads to accept standard male-threaded accessories.

Key features

• Constructed from aluminum alloy for a durable, lightweight tube.
• 1-7/8" (O.D.) / 48mm outer diameter for standard rigging applications.
• 10" (250mm) overall length to provide reach and clearance where needed.
• Double 3/8”-16 female threaded ends so you can attach male-threaded accessories on either side.
• Primarily designed for vehicle rigging, making it suitable where secure threaded mounting is required.

Typical use cases

• Vehicle rigging: use the tube as a standoff or extension when mounting equipment to vehicle-based rigs.
• Suction cup mounting: mount the tube to a suction cup that has a 3/8”-16 male thread.
• Accessory interface: attach any equipment or accessory that comes with a 3/8”-16 male threaded stud.

Compatibility and mounting

The KS-525 mounts via its double 3/8”-16 female threads. Therefore, it pairs directly with:

• Suction cups with a 3/8”-16 male threaded stud.
• Any equipment or accessory that features a 3/8”-16 male thread.

Because both ends are female-threaded, you can orient and connect the tube in multiple configurations to suit your rigging layout.

Specifications

Installation notes

Attach the tube by threading a 3/8”-16 male stud into either female end. Because both ends are threaded, you can extend or join components, or use one end to secure the tube while the other end accepts an accessory. Check that male threads are fully engaged and secure before use in vehicle applications.

FAQ

• Question: Is the KS-525 suitable for vehicle rigging?
  Answer: Yes. The KS-525 is primarily designed for vehicle rigging and provides threaded mounting points suitable for that application.

• Question: What threads does the tube use?
  Answer: The tube has double 3/8”-16 female threads, one on each end, to accept standard 3/8”-16 male studs.

• Question: Can I mount this to a suction cup?
  Answer: Yes. You can mount the KS-525 on a suction cup that has a 3/8”-16 male threaded stud, or on any accessory with that male thread.

• Question: What material is the tube made from?
  Answer: The KS-525 is constructed from aluminum alloy, providing a balance of durability and light weight.