Kupo SW-03 100 cm Long Safety Wire - 5.0mm Diameter

Kupo SW-03 100 cm Safety Wire – 5.0mm Diameter and 50kg Load Rating

This heavy-duty steel safety cable secures lights, cameras, and accessories when you mount them overhead. It provides a secondary attachment in case a primary mount comes loose, helping to reduce the risk of falling equipment. The cable measures 100 cm in length, has a diameter of 5.0 mm, and a load rating of 50 kg. Additionally, it features a locking "D" ring closure for reliable fastening.

Key features

• Length 100cm Diameter 5mm
• Load Rating 50kg
• Locking "D" Ring Closure

Why use this safety wire

When you suspend gear from ceilings, you face the potential for unexpected detachment. Therefore, you should use a safety cable as a backup connection. This Kupo SW-03 cable gives you a compact, straightforward solution that you can loop around fixtures or attach to structural points to keep equipment held even if the main mount fails.

Practical notes for use

Always attach the locking "D" ring closure securely and confirm the connection before operating lights or cameras. Also, never exceed the specified 50 kg load rating; the cable is rated to support loads up to that limit only. Finally, inspect the cable for visible wear or damage before each use and replace it if you find any compromise to its integrity.

FAQ

Question: What is this safety wire used for?
Answer: Use the Kupo SW-03 as a secondary safety attachment when suspending lights, cameras, or accessories from ceilings or overhead points to reduce the risk of falling equipment.

Question: How much weight can it support?
Answer: The cable has a load rating of 50 kg. Do not exceed this limit and ensure the primary mounting and attachment points are rated appropriately.

Question: How do I secure the cable?
Answer: Fasten the locking "D" ring closure around a suitable anchor or fixture and verify the closure is locked before use. Regular inspection for wear or damage is recommended to maintain safety.

Question: How should I inspect and maintain the cable?
Answer: Before each use, visually check the steel cable and the locking "D" ring for signs of wear, corrosion, fraying, or deformation. Replace the cable immediately if you detect any damage, and store it dry when not in use to preserve its condition.