Anton Bauer D-Box Sony (Venice) - V-Mount)

Anton Bauer D-Box Sony (Venice) - V-Mount: Efficient Power Distribution and Remote Control

Anton Bauer's D-Box for Sony Venice is an indispensable solution for filmmakers who need reliable power distribution and smooth remote start/stop functionality. This unit is specifically designed to fit the Sony Venice camera and is perfect for both professional film producers and enthusiasts looking to maximize their filmmaking experience.

Features and Benefits

The D-Box easily attaches to the back of the AXS-R7 or directly to the V-Mount plate on the back of the camera. Its power strip component attaches to the upper right side of the camera via a 3-pin Fischer connector and a threaded hole for tape hangers. The contoured design of the D-Box's power strip allows all cables to be installed without any obstructions, providing a clean and organized rig.

One of the D-Box's most impressive features is its ability to communicate with the camera and enable the use of any ARRI standard start/stop trigger via the 3-pin Fischer port, including ARRI UMC-4 and WCU-4. It also has a DC input that is compatible with the camera's 4-pin XLR connector, allowing for the connection of an AC power source, external power plate, or VCLX battery to power accessories and the camera during a battery swap.

When both the battery and DC input are used, the D-Box prioritizes the DC input, keeping the internal battery fully charged. Additionally, the D-Box features a processor-controlled amp limit that can be set to 3.8, 5.8, or 9 amperes via a slide switch. If the user exceeds the specified current for accessories, only the accessory outputs are disabled while the camera continues to operate normally. The user can easily reactivate accessory power by pressing the reset button once the load has decreased.

The D-Box is also equipped with dual LED indicators for “DC IN” and “BATT.” If the battery voltage is above 12.5V, the LED light is green, while it turns red if the voltage drops below 12V. It becomes orange when the voltage is between these values. The diodes also blink during phase transitions, providing the user with clear information about the power supply.

With high-quality components from Anton/Bauer and a unibody design for the power plate, the D-Box offers both durability and low weight, making it an excellent choice for anyone working in professional film production.

Frequently asked questions

Does the product require phantom power?
No, the D-Box is powered via a 48V DC input or battery.

How does the D-Box communicate with the camera?
The D-Box communicates with the camera via a 3-pin Fischer port, allowing the use of ARRI standard start/stop trigger.

What amp limits can be set on the D-Box?
The amp limit can be set to 3.8, 5.8, or 9 amps via a slide switch.

How does the D-Box indicate battery voltage?
The D-Box has dual LED indicators that light up green if the battery voltage is above 12.5V, red if it drops below 12V, and orange when the voltage is between these values.