Godox LiteFlow Lightstream reflector Kit K1
Legg til overvåking, så gir vi deg beskjed straks varen er på lager igjen.
Godox LiteFlow Lightstream reflector Kit K1
,Godox LiteFlow Lightstream reflector Kit K1The Godox LiteFlow Lightstream reflector Kit K1 is the complete set of mirrored reflector panels from the Knowled LiteFlow range: all four versions in four sizes, with the mounting hardware and cleaning kit. With these panels you bounce the light from a fixture exactly where you want it. On set that saves fixtures, stands and power.
Highlights
Sixteen panels: D1 to D4 in 7, 15, 25 and 50 cmFrom hard light to soft strip light, each with its own label colourOnly 3 percent light loss on the bounceWMR rail holder and WMS mounting stud for hanging the panelsSW01 safety wire, gloves, cleaning spray and wipes
The four versionsD1 with the blue label gives hard light and extends the light path so it falls off naturally. D2 with yellow spreads direct light and redirects it. D3 with green gives soft, natural shadows and is the one for fill. D4 with red pulls the beam into a strip.
The four sizesThe 7 cm panel weighs 46 grams and sits close to a detail. The 15 and 25 cm sizes weigh 167 and 403 grams. The 50 cm panel weighs 1.43 kilos and lifts a whole corner of the set. All sizes work on the same principle.
MountingThe WMR rail holder and the WMS stud hang the panels on a rail or put them on a stand. The SW01 safety wire holds a panel if the mount comes loose. The gloves, the spray and the ten wipes keep the mirrored face free of fingerprints.,Type: Reflector panel setNumber of panels: 16Sizes: 7, 15, 25 and 50 cmVersions per size: D1 hard light, D2 moderately diffused, D3 soft light, D4 soft strip lightWeight per 7 cm panel: 46 gWeight per 15 cm panel: 167 gWeight per 25 cm panel: 403 gWeight per 50 cm panel: 1.43 kgLight loss: approximately 3 percentMounting: WMR rail holder and WMS studSafety wire: SW01Warranty: 2 years,4 x Godox LiteFlow 7, versions D1 to D44 x Godox LiteFlow 15, versions D1 to D44 x Godox LiteFlow 25, versions D1 to D44 x Godox LiteFlow 50, versions D1 to D41 x Godox SW01 safety wire1 x Godox WMR rail holder1 x Godox WMS mounting stud1 x pair of gloves1 x cleaning spray 100 ml10 x cleaning wipe1 x SC17 soft case1 x tool pouch white1 x tool pouch black
Highlights
Sixteen panels: D1 to D4 in 7, 15, 25 and 50 cmFrom hard light to soft strip light, each with its own label colourOnly 3 percent light loss on the bounceWMR rail holder and WMS mounting stud for hanging the panelsSW01 safety wire, gloves, cleaning spray and wipes
The four versionsD1 with the blue label gives hard light and extends the light path so it falls off naturally. D2 with yellow spreads direct light and redirects it. D3 with green gives soft, natural shadows and is the one for fill. D4 with red pulls the beam into a strip.
The four sizesThe 7 cm panel weighs 46 grams and sits close to a detail. The 15 and 25 cm sizes weigh 167 and 403 grams. The 50 cm panel weighs 1.43 kilos and lifts a whole corner of the set. All sizes work on the same principle.
MountingThe WMR rail holder and the WMS stud hang the panels on a rail or put them on a stand. The SW01 safety wire holds a panel if the mount comes loose. The gloves, the spray and the ten wipes keep the mirrored face free of fingerprints.,Type: Reflector panel setNumber of panels: 16Sizes: 7, 15, 25 and 50 cmVersions per size: D1 hard light, D2 moderately diffused, D3 soft light, D4 soft strip lightWeight per 7 cm panel: 46 gWeight per 15 cm panel: 167 gWeight per 25 cm panel: 403 gWeight per 50 cm panel: 1.43 kgLight loss: approximately 3 percentMounting: WMR rail holder and WMS studSafety wire: SW01Warranty: 2 years,4 x Godox LiteFlow 7, versions D1 to D44 x Godox LiteFlow 15, versions D1 to D44 x Godox LiteFlow 25, versions D1 to D44 x Godox LiteFlow 50, versions D1 to D41 x Godox SW01 safety wire1 x Godox WMR rail holder1 x Godox WMS mounting stud1 x pair of gloves1 x cleaning spray 100 ml10 x cleaning wipe1 x SC17 soft case1 x tool pouch white1 x tool pouch black