Hollyland COSMO 600 Wireless HDMI/SDI Transmission System (L-Series)
With the Hollyland COSMO 600, you can transfer an HDMI / SDI signal up to 180 meters to an HDMI or dual SDI output.
The transmitter and receiver set supports up to 1080p60 signals with a latency of less than 1 ms.
The transmitter also offers an SDI loop out and 3.5mm stereo audio input. The system operates on the 5.1-5.9 GHz frequency band and uses AES-128 encryption for secure delivery of your video.
Other features include an OLED display on both devices, timecode and automatic synchronization with camera recording.
The transmitter comes with an L-series battery plate and the receiver has a V-mount plate. In addition, D-Tap includes LEMO cables for switching off both devices from compatible batteries. The transmitter uses two antennas while the receiver has a built-in antenna. Two fungal antennas are also available as accessories instead of standard antennas for better signal strength.
Features:
- Transmits a 1080p60 HDMI / SDI signal to an HDMI or dual SDI output
- range 180 meters with less than 1 ms latency
- SDI runs out
- 3.5 mm stereo audio input
- 5.1-5.9 GHz frequency band
- AES-128 encryption
- OLED
- timecode
- Automatic synchronization with camera recording
- Transmitter: L-series battery plate
- Receiver: L-series battery plate
- D-Tap for LEMO cables
Included:
Transmitter with L-series battery plate
Receiver with L-series battery plate
2 x 5 GHz antenna with directional transmitter
Spare part 5 GHz Omni-Directional Transmitter Antenna
2 x Mushroom antenna
7 ”Articulating Arm
Crab Clamp
2 x D-Tap to 4-pin LEMO cable
2 x flat screwdriver
Hard case