Proaim Grip Master Vibration Isolator Magnetic Car Mount

Proaim Grip Master Vibration Isolator Magnetic Car Mount

Proaim Grip Master, a multipurpose modular magnetic car grip, promises to deliver a wide variety of smooth, professional looking shots in conjunction with some of the most popular 3-axis gimbal stabilizers such as the DJI Ronin/Ronin M/Ronin MX and Movi models, when attached to a vehicle.

Robust, Stable and Secure

Proaim Grip Master comes equipped with 8 Powerful Magnets that ensure a very strong grip necessary for working with expensive moviemaking equipment. Made by using high-grade Aluminum Alloys, this smart, reliable and robust design is capable of holding 15kg/33lb payload.

To save your car from scratching, chipping and other car surface damages, Our Proaim Grip Master comes with specially designed Protective Silicone Pads. The Grip Master comes with 2 Safety Belts to Setup safety lines for your Gimbal and Camera Setups.

Integrated Vibration Isolator

Removes high-frequency vibrations and dampens low-frequency oscillations. It gives you naturally smooth shots from any moving Platform.

A Complete Carrying Solution

Modular System with a Convenient Flight case simplifies travel and storage and makes it possible to take Grip Master as hand-luggage.

Compatible with All Major Gimbal Systems

The Grip Master comes equipped with a Quick Release for Ronin M/MX. However, it has all the necessary threading so you can adapt it to any major Gimbal System.

Smart Design for Quick Setups

The Gripper usually requires no additional grip and rigging hardware. Just Pop it out from the box and place it on any Metal Platform.
Each joint has an Arri Rosette which makes it extremely simple to adjust the position of the magnets to curves and angles of different platforms.

Quick Levelling and Setup Mounting

The Grip Master comes equipped with a Multi Angle Wedge plate to level the gimbal and camera setup quickly.

Included is a Ronin M/Mx Quick Release Plate so you can easily attach Ronin M/MX to the Grip Master. For all other Gimbal system we have Quick Release plates available which can be mounted on the Gripper easily.

Get the Smoothest Shots even at High Speed

The Wire Isolator incorporated into the Proaim Grip Master absorbs the shocks, bumps and high-frequency vibrations while also damping low-frequency oscillations by utilizing strategically configured cables. You can be going as fast as 200km/h and the isolator in conjunction with the camera gimbal makes sure you get incredibly smooth shots even on rough terrains.

Protect your Gimbal

If you hard-mount a gimbal setup to a moving platform, any Jerky movement creates an Enormous amount of stress on the Motors and Bearings of the Gimbal as it tries to stabilize the camera. High-Frequency Vibrations created by moving parts such as motors, rotor blades or propellers and Low Frequency are all absorbed by the sudden changes in direction are all absorbed by the Wired Isolator. This reduces the stress on your gimbal motors that now have to work only to stabilize a softened range of vibrations which in turn increases the life of your Gimbal.

Included:

8 x Magnetic Suction Cups with Silicone Dust Covers
4 x Small Rosette Arms (90mm)
4 x Medium Rosette Arms (120mm)
4 x Large Rosette Arms (150mm)
2 x Safety Belts
1x Gimbal Vibration Isolator
1x Ronin Mounting Plate
1x  Multi Angle Ronin Wedge Plate
1x Flight Transport Case