Crystal Video CVW Beamlink Duo Plus Wireless Video Transmission Kit 1000m

Crystal Video CVW Beamlink Duo Plus Wireless Video Transmission Kit 1000m

Beamlink Plus is a professional outdoor video link system with DFS for video formats up to Full HD 1080p60 in uncompressed 4:2:2 10-bit. The system transmits and receives in the 5 GHz range on four selectable channels in Europe. It offers a high transmission range of up to 1 km (line of sight) with a low latency of less than 70 ms. As an updated version of its predecessor, Beamlink Plus is equipped with a combination port for PTZ control, channel scanning, encoding and decoding in H.265 and signal strength display, in addition to the higher range. The Duo version comes with two transmitters and one receiver, as well as numerous accessories and a case. The transmitters are each powered via a Sony F-type battery or the supplied power cables directly via the camera and the receiver via a V-mount battery or the supplied power cables via 4-pin XLR or D-Tap.

Features:

• Two transmitters with 3G-SDI and HDMI inputs
• Receiver with dual 3G-SDI and HDMI outputs
• Up to 1080p60 video transmission
• 3500 line-of-sight transmission range
• 70 ms latency
• 5.1 to 5.8 GHz frequency
• Tally input/output
• Transmitters with Sony battery dock on the back and V-mount on the front
• Receiver with V-mount plate
• Includes receiver power adapter and transmitter power cables
• OLED status display
• Supports IP streaming (RSTP)
• RS-232 data transmission
• Easy setup

2-Channel Wireless Video

Transmission
Two-channel transmission only occupies one
one wireless channel, significantly saving
spectrum resources.

Up to 1000 m/ 3200 ft of

transmission range (LoS)
The transmission distance can be extended
with the panel antenna.

H.265 CODEC technology

Compared with H.264 technology, H.265
technology offers higher color reproduction,
showcasing the whole image more colorful
and detailed.

Auto channel switch function

When there is a substantial wireless
interference, the receiver will scan the
available channels and switch automatically
to a channel with less interference.

4x4 MIMO and Beamforming

technology

* The direction of wirless beams is more concentrated.
* Wider coverage of wireless network.
* Stronger interference immunity.

Point-to-Point mode and RTSP streaming mode

* HDMI+SDI+LAN port output simultaneously
* Point-to-Point mode or RTSP streaming mode

On-air indication - Tally

Wonderful compatibility

* Compatible with variety of cameras
* The RS232/422 data transparent transmission function
of the system can support the pan-tilt-zoom(PTZ) camera control.

Widely applied to different scenarios

Included:

Crystal Video Technology BeamLink-Duo 2-Channel Full HD Video Wireless Transmission System
2 x Transmitters
Receiver
8 x Transmitter Antenna
4 x Receiver Antenna
2 x 1/4"-20 Screw and Nut Connector
2 x Power Cable for Transmitter
Power Adapter for Receiver
Metal Stand for Receiver

Specifications

Antenna Mode	4×4 MIMO and Beamforming, 5dBi External antenna
Frequency	5.1~5.8GHz
Transmission power	17dBm
Audio Format	PCM, MP2
Receiving Sensitivity	-70dBm
Bandwidth	40MHz
Power consumption	10W
Transmission range	1000m(video code rate: 8Mbps per channel)
Temperature	-10~50 C(Working);-20~80 C(Storage)
Overvoltage Protection	7V~17V
Product Size	96(L)×46(W)×127(H)
RX:BEAMLINK-Duo Plus
Antenna Mode	4×4 MIMO  and Beamforming, 5dBi External antenna
Frequency	5.1~5.8GHz
Receiving Sensitivity	-70dBm
Bandwidth	40MHz
Audio Format	PCM,MP2
SDI Protocol	SMPTE 424M 3G-SDI
Power consumption	13W
Transmission range	700m(video code rate: 8Mbps per channel)
Product Size	176(L)×81(W)×235(H)
Operating voltage	7-17V