Thanos-Pro Gimbal Support with Vest Arm Yoke Collar System for Crane 3s Pro

Thanos-Pro Gimbal Support with Vest Arm Yoke Collar System for Crane 3s Pro

Complete vest system that fits handheld gimbal stabilierz like the Dji ronin-s, moza air 2 and Crane 2 depending on yoke choice.

Z-Axis-Ball Bearing- Mobility

Thanks to double ball bearings, the gimbal becomes completely movable in both tilt and pan without causing any lateral shaking.

Vest

With the help of the vest you relieve the weight of the gimbal completely from the arms so that you film long passports without any hassle.

Double Arm -Damping

The dummy supplied double arm allows you to avoid up and down shakes that you can get when you just use the gimbal handheld and get above all when you need to make faster movements like when you run.

Compatibility

Thano's pro can be used  with almost asll gimbals as long as they have a 1/4" screw hoel on the bottom of the gimbal:
Suported examples:
Moza Air 2 handheld gimbal
DJI Ronin-S handheld gimbal
DJI Ronin-SC handheld gimbal
Zhiyun CRANE 3 handheld gimbal
Zhiyun CRANE 3S handheld gimbal
Single-handle gimbals with 3/8"-16 or 1/4"-20 mounting thread

Features

Adjustable vest fits most body sizes
19.8 lb load capacity
Reduces up-and-down motion bounce and shake
Adjustable dual-spring arm with two joints
3/8"-16 gimbal mounting screw

Included:

DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for Zhiyun CRANE 3S,2S DJI RS2 RSC2 Moza air 2 etc
With 1/4" screw pin adapter and 3/8" screw adapter,this system can work with any single handle gimbal.
Dual Spring Arm 5-12.5KG payload
Support Vest
Bag Shoulder Strap
Carry Case
Adapter for ZHIYUN CRANE 3S
Allen key for tighten arm tension

Specs:

Gimbals Collar/Yoke	10.5” L x 5.1” W x 1.2” @ 1lb
Weighted Base	19*11*3cm@1.6kg (all weights attached)
Counter Weight	130g*8pcs  65.3g*4pcs
Supporting Vest	2.25kg    55*50*20cm
Arm Capacity	2.5kg-9kg/5.51-19.84lbs
Arm	2.95kg   75*18*7cm
Handheld Gimbals Compatibility	DJI Ronin-S/Zhiyun Crane 2/Moza Air 2
Weighted Base Utilizes	Ø15mm x 60mm rods
¼-20 accessory mounting holes	Gimbal Collar/Yoke handle 2holes
Arm+Vest Weight	6.5kg/14.33lbs
Gimbal Collar/Yoke +handle +counter weight	2.5kg/5.51lbs
Package Size	65x55x25
THANOS PRO Gross Weight	11kg