Kuvaus
Tuotenumero: 865
Saramonic SR-AX107 Preamp Audio Adapter
The Saramonic SR-AX107 2-Channel XLR Audio Adapter is a 2-channel XLR audio adapter featuring an isolation transformer which provides a pure, noise-free sound, as well as preamplifier and phantom power controls. The device allows you to connect microphones, wireless microphones, digital recorders, external audio mixers, soundboards, and more to your DSLR camera or camcorder via two balanced XLR inputs.
The unit is designed to save hours in post-production. An on-board level meter allows you to verify the proper input levels in real time, and the output signal can be adjusted by the level controls for optimum recording. The dual headphone jacks feature isolated volume controls, and allow you monitor the audio from the adapter at the input and output points. Left and right Peak switches allow you to turn on/off the LED signal indicators which flash red for overload, and the ACG on/off switch reduces noise during quiet moments of recording by cutting out your camera's Auto Gain Control function.
Isolation Transformer provides a pure, noise-free sound
Level controls allow you to balance both input levels
Phantom power switch allows you to select 0, 12, or 48V of phantom power
Auto Gain Control switch reduces noise during quiet moments of recording by cutting our your camera's Auto Gain Control function
Specs:
• 1/8" (3.5mm) Auxiliary unbalanced Input
• RCA Monitor input jacks for connecting the AV cable
• Ground Select Switch for eliminating the ground hum & noise
• Gain (HIGH/LOW) Switches
• Level Meter Indicates the sound level
• AGC ON/OFF Switch
• 12V/48V Phantom Power
• 2x Balanced XLR Inputs
• 1/8" (3.5mm) Output
• Dual Gain Control Knobs
• Stereo/Mono Output Switch
• Switchable LINE / MIC/ PH Switches
• Headphone jack for monitoring
• Operates on one 9 volt battery ( not included )
• XLR / RCA Monitor Switch
The Saramonic SR-AX107 2-Channel XLR Audio Adapter is a 2-channel XLR audio adapter featuring an isolation transformer which provides a pure, noise-free sound, as well as preamplifier and phantom power controls. The device allows you to connect microphones, wireless microphones, digital recorders, external audio mixers, soundboards, and more to your DSLR camera or camcorder via two balanced XLR inputs.
The unit is designed to save hours in post-production. An on-board level meter allows you to verify the proper input levels in real time, and the output signal can be adjusted by the level controls for optimum recording. The dual headphone jacks feature isolated volume controls, and allow you monitor the audio from the adapter at the input and output points. Left and right Peak switches allow you to turn on/off the LED signal indicators which flash red for overload, and the ACG on/off switch reduces noise during quiet moments of recording by cutting out your camera's Auto Gain Control function.
Isolation Transformer provides a pure, noise-free sound
Level controls allow you to balance both input levels
Phantom power switch allows you to select 0, 12, or 48V of phantom power
Auto Gain Control switch reduces noise during quiet moments of recording by cutting our your camera's Auto Gain Control function
Specs:
• 1/8" (3.5mm) Auxiliary unbalanced Input
• RCA Monitor input jacks for connecting the AV cable
• Ground Select Switch for eliminating the ground hum & noise
• Gain (HIGH/LOW) Switches
• Level Meter Indicates the sound level
• AGC ON/OFF Switch
• 12V/48V Phantom Power
• 2x Balanced XLR Inputs
• 1/8" (3.5mm) Output
• Dual Gain Control Knobs
• Stereo/Mono Output Switch
• Switchable LINE / MIC/ PH Switches
• Headphone jack for monitoring
• Operates on one 9 volt battery ( not included )
• XLR / RCA Monitor Switch