Descrição
Artigo n.: 31462
O SmallRig 5487 Turbo Charging Kit inclui duas baterias de reposição de alto desempenho e um carregador rápido de dois canais projetado para câmeras Panasonic DMW-BLK22. Fornece energia confiável para sessões de filmagem prolongadas e suporta monitoramento da bateria na câmera graças a um chip de decodificação completo. O kit também preserva a compatibilidade com carregadores originais e evita avisos de pop-up na câmera.
O carregador de duas entradas carrega duas baterias simultaneamente e também pode carregar uma única bateria isoladamente. Em condições ideais, carrega completamente duas baterias em aproximadamente 2 horas para um retorno eficiente entre sessões.
Quando você conecta um adaptador de menor potência (por exemplo, um adaptador 5V / 2.4A), o carregador muda para o modo de carga lenta. Nesse modo, o Canal 1 recebe prioridade e será carregado primeiro; o Canal 2 começa a carregar automaticamente assim que o Canal 1 estiver totalmente carregado.
O carregador usa circuitos inteligentes para proteger tanto as baterias quanto seu equipamento. Ele monitora continuamente a temperatura e a voltagem, e responde automaticamente:
Cada canal de carregamento possui cinco indicadores LED que mostram os níveis de energia em incrementos de 20%. Os LEDs funcionam mesmo sem alimentação externa, permitindo verificar o nível da bateria rapidamente. Além disso, uma luz de aviso vermelha acende quando os níveis da bateria estão criticamente baixos.
O carregador inclui uma entrada USB-C universal e acompanha um cabo USB-C para USB-C de carregamento rápido. Portanto, você pode alimentar o carregador a partir de várias fontes, como adaptadores de parede, carregadores de carro e power banks. Para melhor desempenho, a SmallRig recomenda usar um adaptador de energia com saída de 22,5W ou superior.
FCC, CE, RoHS, ISED
| Specification | Details |
|---|---|
| Charger Specifications | |
| Material(s) | PC + ABS |
| USB-C Input | 5V / 2.4A, 9V / 2A, 12V / 1.75A, 15V / 1.5A; 22.5W (Max) |
| USB-C Protocol | PD3.0, QC2.0, QC3.0 |
| Rated Output (Per Channel) | 8.4V / 1A |
| Operating Temperature | 0°C to 45°C |
| Battery Specifications | |
| Battery Type | Lithium-ion Battery |
| Nominal Voltage | 7.2V |
| Cell Capacity | 1940mAh |
| Rated Energy | 13.968Wh |
| Charging Limit Voltage | 8.4V |
| Charging Current (Standard) | 0.2C (408mA) |
| Charging Current (Fast) | 0.7C (1428mA) |
| Maximum Discharge Current | 4A |
| Discharge Cut-off Voltage | 5.0V |
| Charging Temperature | 0°C to 45°C |
| Discharging Temperature | -10°C to 60°C |
Question: How long does it take to charge the batteries?
Answer: Under recommended conditions the dual-slot charger fully charges two batteries in approximately 2 hours. Using a lower-output adapter (for example 5V / 2.4A) switches the unit to slow-charge mode and extends charging time.
Question: Will my camera recognize these batteries and show remaining power?
Answer: Yes. The kit uses a full decoding chip to ensure compatibility with Panasonic DMW-BLK22 batteries. This eliminates pop-up warnings and supports in-camera power display as well as use with the original charger.
Question: What safety features protect the batteries while charging?
Answer: The charger monitors temperature and voltage continuously. It slows charging during overheating, cuts off power in case of overvoltage, and applies trickle charging near full capacity to preserve battery health.
Question: Can I charge from a power bank or car charger?
Answer: Yes. The charger accepts a universal USB-C input and comes with a 60W USB-C to USB-C cable, making it compatible with wall adapters, car chargers, and power banks. For best results, use an adapter with 22.5W or higher output.
Question: How can I tell the battery level when charging or on the go?
Answer: Each charging channel has five LED indicators that display power in 20% increments. These LEDs work even without external power. Additionally, a red warning light alerts you when battery levels are critically low.