CINEGEARS Ghost-Eye 150M V2 Wireless HDMI/3G-SDI Transmission Kit

CINEGEARS Ghost-Eye 150M V2 Wireless HDMI/3G-SDI Video Transmitter Kit

The Cinegears Ghost-Eye 150M V2 transmitter and receiver set allows you to transmit up to 1080p60 uncompressed HD video and audio at distances up to 492', an increase of approximately twice the original 150M set. This Ghost-Eye set features both HDMI and 3G-SDI inputs and outputs, 10-bit 4:2:2 video, and simultaneous use of up to four of ten frequencies. A multicasting feature allows you to use a 150M transmitter to send your video feed to up to four receivers (additional receivers not included). Additional features of the Ghost-Eye 150M V2 set include HDMI to SDI cross-conversion, AES encryption and 5GHz Wi-Fi compatibility. Cross-compatibility with Ghost-Eye 100M/300M/400M devices means you can mix and match components.
The 150M V2 transmitter and receiver can each be powered by an NP-F970 L-series battery, or via their standard 2-pin LEMO power connectors. Two antennas are included with the transmitter; the receiver has a built-in directional antenna. A hard shell with dedicated foam cutouts is included in the Ghost-Eye 150M V2 kit.




CINEGEARS Ghost-Eye Wireless HDMI and SDI video transmitter 150M V2 (L-Series Plate)
Transmit uncompressed, 1080p60, 10-bit, 4:2:2 video up to 985 feet with the CINEGEARS Ghost-Eye Transmitter 150M V2. It securely supports up to four receivers (sold separately) simultaneously on each channel; plus, it's cross-compatible with all other Ghost-Eye versions (100M, 150M, etc.), so you can connect to longer/shorter range receivers if you wish.
Whether in a point-to-point or point-to-multipoint configuration, your HDMI or SDI signal is transmitted at a low latency rate of less than 1ms in the license-free 5 GHz frequency band. A minimum range of 492 ft (150 m) line of sight is ensured, while the maximum range is 985 ft line of sight. (It has even been successfully tested at much longer distances in open spaces.) The transmitter can also cross-convert HDMI/SDI, so you can input a signal through HDMI and output through SDI on the receiver end or vice versa.
Small obstacles in the line of sight are compensated for by an adaptive signal logic algorithm that keeps your transmitter and receiver connected. For safety, signals dropped due to interference or loss of line of sight are automatically reconnected within 1 ms after the obstacle is removed - automatic relinking and improved hardware for a more stable connection are the new features of the V2 version. Other features of the transmitter include AES-128 signal encryption and plug-and-play installation.
The 150M transmitter comes with two paddle antennas and a Sony L-Series battery plate. Batteries are sold separately.

Key Features

Transmits uncompressed, 1080p60, 10-bit, 4:2:2 video up to 985 feet.
Compatible with all Ghost Eye receivers (100M, 150M, etc.)
Supports 4 receivers simultaneously on each channel
Less than 1 ms delay
Operates on the license-free 5 GHz frequency band; coexists with Wi-Fi
492 feet (150 m) line of sight to 985 feet max transmission distance
HDMI and SDI outputs with cross-conversion capability
Adaptive signal logic compensates for small obstacles in the line of sight
Automatic re-linking
AES-128 signal encryption
Plug-and-play installation
Includes two paddle antennas
Sony F970 L-Series battery plate


CINEGEARS Ghost-Eye Wireless HDMI and SDI Video Receiver 150M V2 (L-Series Plate)
The CINEGEARS Ghost-Eye receiver 150M V2 pairs with any Ghost-Eye transmitter (100M, 150M, etc.) and accepts uncompressed, 1080p60, 10-bit, 4:2:2 video from up to 985 ft with less than 1 ms of latency (depending on the transmitter). It operates on the license-free 5 GHz frequency band and ensures a minimum distance of 492 feet (150 m) line of sight (from a 150M or higher transmitter), while the maximum distance is 985 feet (longer distances have been successfully tested in open spaces).

The receiver has both HDMI and SDI outputs and can be cross-converted, whereby an HDMI input can be output via SDI or vice versa. Small obstacles in the line of sight are compensated for by an adaptive signal logic algorithm that keeps your signal connected. For safety, signals dropped due to interference or loss of line of sight are automatically reconnected within 1 ms after the obstacle is removed - automatic re-linking and improved hardware for a more stable connection are the new features of the V2 version. Other features of the receiver include AES-128 signal encryption and plug-and-play installation.

The 150M receiver has built-in antennas and a Sony L-Series battery plate. Batteries are sold separately.

Key Features

pairs with any Ghost-Eye transmitter (100M, 150M, etc.)
Accepts uncompressed, 1080p60, 10-bit, 4:2:2 video from up to 985 feet.
Less than 1 ms delay
Operates on the license-free 5 GHz frequency band; coexists with Wi-Fi
492 ft line of sight, to 985 ft max transmission distance
HDMI and SDI outputs with cross-conversion capability
Adaptive signal logic compensates for small obstacles in the line of sight
Automatic re-linking
AES-128 signal encryption
Plug-and-play installation
Built-in antennas
Sony L-Series battery plate