Crystal Video Cvw Pro Z Zero-Delay Wireless Video Transmission Kit

CVW PRO Z Zero-Delay Wireless Video Transmission Kit

The crystal video Cvw Pro Z consists of one transmitter and one receiver that enable you to transmit an HDMI or 3G-SDI 1080p video signal at distances up to 2625' (line-of-sight). This system features support for up to 1080p60, 10-bit, 4:2:2 video, a scanning feature that selects the best available channel, and OLED display screens on both the transmitter and receiver.
The receiver has a V-Mount battery plate and the transmitter is designed with a pass-through plate that enables you to power your camera and the transmitter using a single V-Mount battery. An articulating magic arm is included with the set.

Features:

• Transmission speed: less than 1ms
• Range with visual contact: 800m
• HDMI
• SDI input; SDI loop out
• V-mount battery holder
• Frequency range (EU): 5.1 ~ 5.9 GHz
• Channel Scanning (ie the devices continuously check the available frequency ranges. The free channels are shown on the display. The channel is changed manually by pressing a button.)
• Smart Cooling (The fan can be switched off if necessary. If a certain temperature is exceeded, the fan starts automatically.)
• Bandwidth: 40MHz
• Video in Full HD 1080 / 60p (uncompressed 4: 2: 2 at 10bit)
• Audio formats: PCM, DTS-HD, Dolby True HD
• Frequency selection: manually with buttons (control via LED display)
• Timecode transmission
• slim and compact, ideal for mounting on the camera
• light and robust aluminum housing

Environment Sensing

Channel Scan Feature will evaluate the available channels and displays on the OLED screen.

Zero latency uncompressed video transmission

Up to 1080P60Hz,
10-bit with 4:2:2 chroma sampling,
rendering your cinematic storytelling
much more nuanced and immersive.

800 m/2600 ft transmission range (LoS)

Big coverage helps to enlarge your vision of cinematic storytelling.

Flexible receiver connectivity

This multicast mode allows you to present the live shots to more people, such as your clients, producers, focus puller, etc.

Well-protected interfaces and sandwich V-mounted structure

The V-Mount structure makes much easier installation and can power up the transmitter and the camera simultaneously.

SDI + HDMI, compatible with variety of cameras

A wonderful solution for directors, cinematographers, video producers, vloggers, cinematic enthusiasts, etc.

Instant installtion with a 24.5mm ultra-thin body

The system is slim enough to be integrated with the camera or steadicam.

Smart cooling design, auto or manual mode for your selection

The fan could be turned off manually to make the system noise free.

Included:

1x high-quality case with precisely fitting foam
1x transmitter (with 2 antennas)
1x receiver (with 5 antennas)
2x mushroom antennas
1x BNC cable with straight plug connection (80cm)
1x BNC cable with angled plugs (40cm)
1x DC adapter cable (D-Tap to 2pin)
1x articulated arm with cold shoe mount

Specifications

Mounting options for the transmitter

3x 1/4 "internal thread on the underside (1x joint adapter included)
1x V-mount adapter for mounting on the camera + 1x V-mount battery holder

Mounting options for the receiver

2x 1/4 "internal thread on the bottom
1x 3/8 "internal thread on the bottom
1x V-mount battery holder

Video-Formats

1080p (23.98/24/25/30/50/60 fps)
1080psf (23.98/24/25 fps)
1080i (50/59.94/60)
720p (50/59.94/60 fps)

Audio-Formats

PCM
DTS-HD
Dolby True HD

Connections transmitter (transmitter)

1x 3G-SDI In
1x 3G-SDI (loop) Out
1x HDMI In
1x USB Typ-C
1x DC In 7 - 36 V, 2pin female
2x Antenna ports

Receiver connections

1x Dual 3G-SDI Out
1x HDMI Out
1x USB Typ-C
1x DC In 7 - 36 V, 2pin female
5x Antenna ports

Power supply

Power consumption: 12W transmitter / 8W receiver
V-mount battery holder firmly integrated in the housing (for transmitter and receiver)
via D-Tap

measurements and weight

Transmitter
325mm x 95mm x 40mm (including antennas)
135mm x 95mm x 40mm (without antennas)
474g (including antennas)
420g (without antennas)
Receiver
355mm x 165 ~ 485mm x 35mm (including antennas)
165mm x 105mm x 35mm (without antennas)
616g (including antennas)
486g (without antennas)
Case including accessories
145mm x 410mm x 34mm
3.84kg

Material

Housing of the devices made of metal
Antennas of metal with plastic sheathing
Case made of plastic