Teradek RT Lens Mapping for CTRL.1 with Pre-Marked Focus and Iris Rings (Meters)

Teradek RT Lens Mapping for CTRL.1 with Pre-Marked Focus and Iris Rings (Meters)

• Auto-calibrate lenses to pre-marked focus rings
• Save time on set from manually calibrating after every lens swap
• Note: This uses Metric measurements on rings. There is an Imperial version available.

Ring Measurements

• 1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus
• 1 x Teradek RT Pre-Marked Iris Ring - 1-32

Lens Mapping

CTRL.1 introduces built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.

Specifications:

• 1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus
• 1 x Teradek RT Pre-Marked Iris Ring - 1-32
• 1 x Firmware License Key Card for TeradekRT With License Key