Z CAM E2-M4 Professional 4K Cinema Camera Mft

Z CAM E2-M4 Professional 4K Cinema Camera MFT

The Z CAM E2-M4 4K Cinema camera has an interchangeable lens mount by Micro Four Thirds, with the same camera body as the z cam flagship series and with the latest update as the Z CAM E2, you can record ProRes RAW with selected Atomos recorders/monitors. This compact camera records DCI and UHD 4K at up to 160 fps, as well as HD up to 240 fps and records on a CFast 2.0 card (not included). A future update will allow the E2-M4 to support RTMP, RTPS and SRT live streaming directly from the camera without the need for a computer. The camera features a 4/3" sensor with 10/12-bit color support and a nominal 13 stops of dynamic range with 16 stops when set to WDR. The camera supports recording in 10-bit ProRes 422, as well as H.265 and H.264 codecs for efficient compression of your image.

The E2-M4 can be controlled via serial ports, a 2.5mm LANC connector, a USB Type-C port, an Ethernet port, or with the Z Camera iOS app to control the camera via Wi-Fi and to preview a live image and configure settings. The camera can record timelapse, slowmation and can even live stream via its Gigabit Ethernet port. The E2-M4 camera can be powered from a separately available Sony Np-l series battery or via an AC adapter (not included).

ProRes RAW

Supports 12-bit ProRes RAW recording via HDMI when used with selected Atomos recorders/monitors.

Replaceable Micro Four Thirds Mount lens mount

The included MFT mount can be swapped for separately available ARRI PL or Leica M lens mounts, giving you access to a wide range of lenses.

Direct streaming from the camera

Supports RTMP, RTPS and SRT live streaming directly from the camera without the need for a computer.

4K recording

• Records DCI / UHD 4K up to 160 fps or 1080p up to 240 fps to the limit of your recording media's capabilities.
• Triple native ISO 80/160/800
• 13 dynamic range stops with ZLog and 16 dynamic range stops in WDR mode
• Built-in multi-based noise reduction technology to produce clean images
• H.265 (10-bit color) internal recording on CFast 2.0 card
• 10-bit ProRes recording in 422 HQ, 422, 422 LT and 422 Proxy supported
• Video output via HDMI 2.0 supported (up to DCI 4K at 60 fps, 10-bit color, YUV 422)
• Full metal housing for efficient heat dissipation

Interfaces and expandability

• USB Type-C port for live view and control via iOS device with Z Camera app installed
• USB Type-C port can also be used for external SSD recording
• Ethernet port for live view, control and file transfer to browser or computer running Z CAM software
• HTTP API and SDK are also available
• COM (RS232) port supports the UART protocol
• LANC port for remote control including power on / off

iOS app

Z Camera is a mobile application for live preview and control of the camera via Wi-Fi/USB cable connection. It allows you to start/stop recording and adjust the camera settings remotely, and also has advanced features on the camera's live preview. It can be downloaded from the Apple App Store.

Camera body

• Made of aluminum for strength and heat dissipation
• Nine threaded mounting holes around the outer chassis
• Sensor plane marking for accurate distance measurements
• Powers from separately available AC/DC adapter or L-series batteries
• Active, replaceable MFT mount