SHAPE 15 mm rod system

SHAPE 15 mm rod system

The SHAPE 15 mm Rod System provides support for rod-mounted accessoriessuch as matte boxes, lens adapters, lens supports, and follow focus mechanisms.By supporting these accessories, the system transfers additional weight awayfrom your lens. The 15 mm Rod System is composed of a Sliding Rod Bloc and apair of 15 mm aluminum rods.
The rods’ threaded female ends enable theattachment of 1/2″-13–threaded extension rods (not included). This system canbe easily attached and removed from the front of the camera using a 4 mm hexkey (not included). The 15 mm Rod System uses a small thumb lever forhorizontal adjustments of the bracket along the rods.
The same 4 mm hex key canbe used to adjust the bracket up to 1 3/8″ vertically to correspond to theheight of the accessory. This system features an aluminum bracket and aluminumrods with stainless steel screws.

The SHAPE Sliding Rod Block allows you to attach 15 mm rods to selectSHAPE gear and adjust them vertically to support different sized lenses andaccessories. Using supplied screws, it can be attached to the front ofrigs/accessories that support the screw pattern. One ratchet knob tightens bothoptional rods in place. It comes with a pair of 15 mm Female – Female Rod (8″)are anodized aluminum rods with 1/2″-13 threaded female extremities.

Technical Info

• Weight: 0,18 kg

• Dimensions: 20,32 x 9,53 x 5,08 cm

• Material: Aluminum

• Warranty: All SHAPE products and accessories are covered by a manufacturer’s warranty solely on CNC machined parts. 

Included

• 1 x SHAPE 15mm Rod Bloc System

• 1 x SHAPE Pair of Female-Female Rods 8“ (SH2ROD15FF8)