SHAPE 19mm Studio Sliding Baseplate for Sony Venice

SHAPE 19mm Studio Sliding Baseplate for Sony Venice

SHAPE lightweight Arri standard 12“ dovetail plate

Use this ARRI Standard 12″ Dovetail Plate from SHAPEwhen balancing front- or back-heavy camera loads.

The studio bridgeplates 19 mmor 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweightARRI standard 12″ dovetail plate for additional leverage and mounting options.Both the aluminum, Teflon-coated design and tapered ARRI dovetail configurationallow your mounted equipment to slide back and forth easily.

A stopper screw on one end and a safety latch on the other prevent your equipment from accidentally sliding off the plate. There are twelve 1/4″-20 and five 3/8″-16 threads down the center of the plate for mounting.

SHAPE Bridge plate 19mm studio Arri standard

The studio bridgeplate can easily slide onto thelightweight ARRI standard 12″ dovetailplate (DP12A) for additional leverage and mounting options. It is made of CNCaluminum and it is also designed with locking levers to secure the bridgeplateto the dovetail.

The ARRI Standard Studio Bridgeplate comes with two tapered,12″ 19 mm rods (19TUBE12) to easily mount anddismount your camera and accessories. The studio-offset rods are spaced 104 mmapart. One 1/4″-20 and one 3/8″-16 screw allow mounting a variety of cameras, and the platelocks and slides up and down the rods with the use of a locking lever. A flatscrewdriver is provided to tighten the mounting screws, and it can be attachedto the bridgeplate with a magnet.

Technical Info

• Weight: 1,91 kg

• Dimensions: 8,66 x 14,50 x 30,00 cm

• Material: Aluminum

• Warranty: All SHAPE products and accessories are covered by a manufacturer’s warranty solely on CNC machined parts.

Included

• 1 x SHAPE Arri Standard 12“ Sliding Dovetail (SHDP12A)

• 1 x SHAPE 19mm Studio Arri Standard Bridge Plate (SHDP19S)

• 1 x SHAPE Sliding Riser and Locking Lever

• 1 x SHAPE Sliding Camera Plate

• 1 x SHAPE pair of 19mm Rods 12“ (SH19TUBE12)