B&W Outdoor Cases BW Outdoor Battery.case 908.8. Transport & Storage of defective lithium batteries, yellow

B&W Outdoor Battery.case P908.8 (Yellow) – Approved Transport & Storage for Intact and Defective Lithium Batteries (P903 / P908)

The B&W Outdoor Battery.case P908.8 is a robust, approved solution for the safe transport and storage of lithium-ion batteries. It suits batteries from devices such as e-bikes, drones and cordless screwdrivers, and it meets the transport regulations P903 and P908 for both intact and defective lithium batteries.

RECOMMENDATIONS FOR HANDLING DEFECTIVE LITHIUM BATTERIES

Follow these handling recommendations to store and transport lithium batteries safely. The case combines several tested safety features and approvals to reduce risk during storage, transport and temporary charging.

• Unique safety system closes automatically in the event of a fire inside - registered with the German Patent and Trade Mark Office
• High-quality plastic case with internal metal container
• The active carbon filter reduces escaping gases and reduces the formation of soot in the event of a battery fire
• Tested and approved as hazardous goods packaging in accordance with ADR P908 and therefore suitable for the transportation of intact and defective lithium batteries on public roads
• Conforms to the strict requirements of UN packaging specifications 3480/3481
• Tested under real conditions: No flames escaped from the battery fire during the tests and the outer shell of the B&W battery.cases 908 remained constantly below 100°C

Official Approval: P903 and P908

The B&W battery.case P908.8 carries official approval for both transport and storage under transport regulations P903 and P908. This approval covers intact batteries as well as batteries that have been declared defective for safety reasons. Use the case in accordance with the respective instructions for P903 and P908 to ensure compliance during handling and transport.

P903 – Transport and Storage of Intact Lithium Batteries and Accumulators

• Application instructions: Use the foam to protect the battery; adapt the foam to the battery.
• Fire bags do not have to be used; protect batteries from short circuits; if necessary, follow further specifications and detailed operating instructions

P908 – Transport and Storage of Defective Lithium Batteries and Accumulators

Use the P908 instructions when batteries are defective. The case is suitable for the following specific conditions; follow the corresponding instructions for each situation.

• Battery declared defective for safety reasons
• Deformed or inflated battery
• Degassed cell or battery
• Burnt out cell or battery
• Melted plastic parts or connections on the battery
• Strange gas smell detectable
• BMS (if present) identifies defective cells
• Damaged casing
• The B&W battery.case P908.8 is the ideal solution for the safe storage and easy transport of intact and defective lithium batteries. Extremely robust and user-friendly in use. Tested and approved as hazardous goods packaging and therefore suitable for the transport of intact and defective lithium batteries on public roads. The maximum payload is 8kg.

Safety Features and Test Results

The case has a patented safety mechanism that closes automatically if a battery inside catches fire. In addition, the activated carbon filter helps to reduce escaping gases and to lower soot formation in a battery fire. Independent tests using real, burning bicycle batteries showed no flame escape and kept the outer shell temperature below 100°C throughout the testing.

Design, Foam and Charging Capability

Inside the P908.8 you will find pre-punched cube foam that you can adapt to fit different battery sizes. This customisable foam provides a stable and secure hold during transport.

The case design also supports safe charging while closed. It offers a sophisticated cable routing solution and a slide-in plate that secures cables with a maximum permissible diameter of up to 8 mm. A fireproof protective bag provides extra protection when storing or charging a defective Li-ion battery.

Supplementary Product Description

B&W develops customised and reliable products with attention to quality and customer requirements. Their cases and bags are designed not only as transport solutions but also to provide dependable protection and practical features for professional and consumer use.

Features

• Extremely sturdy case: polypropylene (PP) housing
• Approved for the transport and storage of intact and defective lithium batteries in accordance with transport regulations P903 and P908
• Stackable
• Two eyelets for padlocks (Ø 7 mm)
• Rubberised carrying handle
• activated carbon filter
• lockable cable grommet
• pre-punched cube foam
• Foam lid
• One fireproof protective bag (40 x 60 cm)
• *The contents of the case shown are not included.

Dimensions and Weights

FAQ

question: Which types of batteries can I store and transport in the B&W battery.case P908.8?
Answer: You can store and transport both intact and defective lithium-ion batteries in the P908.8, including batteries from e-bikes, drones and cordless screwdrivers, provided you follow the P903 and P908 instructions.

question: Is the case approved for transport on public roads?
Answer: Yes. The case is tested and approved as hazardous goods packaging in accordance with ADR P908 and conforms to UN packaging specifications 3480/3481, making it suitable for transport on public roads when used according to the regulations.

question: How does the safety system work and what were the test results?
Answer: The case features a unique safety system that closes automatically if a fire occurs inside. It also uses an activated carbon filter to reduce escaping gases and soot. In real-condition tests with burning bicycle batteries, no flames escaped and the outer shell temperature remained below 100°C.

question: Can I charge a battery while it is inside the closed case?
Answer: Yes. The case allows charging while closed thanks to a cable routing design and a slide-in plate that secures cables up to 8 mm in diameter. Use the lockable cable grommet and follow charging instructions to maintain safety.

question: What additional protective items are included with the case?
Answer: The P908.8 includes pre-punched cube foam for custom adaptation, a foam lid and one fireproof protective bag (40 x 60 cm) to add another layer of protection when storing or transporting a defective Li-ion battery.