Chasing AC-Power Supply Cable 200m for M2/M2 S/M2 Pro

Chasing AC-Power Supply Cable 200m for M2/M2 S/M2 Pro – Enables unlimited runtime when used with the Control Console

This 200m AC-Power supply cable is designed for use with CHASING M2 series underwater ROVs, including M2, M2 S and M2 Pro. When connected through the CHASING Control Console, it allows the ROV to run continuously by supplying AC power alongside battery power.

Use with the CHASING Control Console to achieve unlimited battery life

Connect the AC power supply to the Control Console, and then link the Control Console to the AC power supply module using the AC cable. Once connected, the system continuously supplies power to the underwater ROV. In practice, this setup lets the vehicle operate without time limits imposed by battery capacity, so you can run extended missions without swapping batteries.

4-core AC cable supports both power and communication up to 200 meters

The cable uses a 4-core design that carries both power and communication signals. It supports reliable operation and control transmission for the underwater ROV at distances up to a maximum of 200 meters. The product is available in either 100m or 200m lengths, and this listing covers the 200m option.

Manual winder for easier cable management

The AC power supply system includes a manual winder. Use the winder to spool and unspool the cable cleanly, reducing tangles and simplifying handling before and after dives. The manual winder addresses common cable-management challenges and helps keep operations efficient.

Specifications

Key benefits at a glance

• Enables continuous operation of CHASING M2-series ROVs when used with the Control Console.
• Combines power delivery and communication over a single 4-core cable for runs up to 200 meters.
• Manual winder simplifies deployment and retrieval, improving cable handling and storage.
• Available in 100m or 200m lengths to match mission requirements; this product specifies the 200m cable.

FAQ

• Question: Which ROVs is this AC-Power supply cable compatible with?
  Answer: The cable is intended for use with CHASING M2 series ROVs, specifically M2, M2 S and M2 Pro, when operated together with the CHASING Control Console.
• Question: Can this cable carry both power and control signals?
  Answer: Yes. The 4-core cable provides both power and communication capabilities to the ROV for reliable operation up to 200 meters.
• Question: How do I connect the system to achieve continuous power?
  Answer: Connect the AC power supply to the Control Console, then connect the Control Console to the AC power supply module via the AC cable. Once connected correctly, the system supplies continuous power to the ROV.
• Question: Is cable management included?
  Answer: The system includes a manual winder to facilitate spooling and storage, which reduces tangles and simplifies handling during deployments.
• Question: What are the electrical output specifications I should expect?
  Answer: The AC power supply converts Input AC200-240V to an Output of DC25.2V at 10A, providing 250W of power. These are the listed specifications for the unit.