Chasing Sediment Sampler for Grabber Arm 2

Chasing Sediment Sampler for Grabber Arm 2 – Replacement sampler with 170 mm max opening

This is a replacement sediment sampler specifically for the Grabber Arm 2. It provides a reliable means to collect sediment samples underwater and is rated for use down to 100 m depth. Keep the original performance of your Grabber Arm 2 by swapping in this direct replacement part when needed.

Key features

• Designed as a replacement for the Grabber Arm 2.
• Max opening: 170 mm, allowing the sampler to capture a substantial sediment volume.
• Max grabbing force: 7 kg, specifying the maximum grip capacity.
• Sediment sampler weight: 325 g, reflecting the component mass you will add to the arm.
• Max diving depth: 100 m, indicating the rated operational depth for sampling tasks.
• Sampler size: 178 x 120 x 85 mm, showing the physical footprint of the unit.

How these specifications matter

The 170 mm maximum opening defines how large a sediment pocket the sampler can capture. In addition, the 7 kg maximum grabbing force clarifies the upper limit of grip strength the unit will exert when collecting material. Together, these values help you match the sampler to the type and amount of sediment you plan to collect.

Furthermore, the sampler’s weight of 325 g and its physical dimensions (178 x 120 x 85 mm) are important when planning payload balance and clearance on the Grabber Arm 2. Finally, the 100 m maximum diving depth sets the operational envelope for underwater sampling tasks.

Specifications

Compatibility and usage notes

This unit is sold as a replacement part for the Grabber Arm 2. Use it when you need to restore or maintain sediment sampling capability on that specific arm. The stated maximum diving depth and grabbing force should be observed during operation to ensure the sampler performs within its rated limits.

FAQ

Question: Is this sampler compatible with any other arms or models?
Answer: This product is described as a replacement sediment sampler for the Grabber Arm 2. For compatibility with other arms or models, compare dimensions and mechanical interfaces or contact the supplier for confirmation.

Question: What depth can I safely use this sampler at?
Answer: The sampler is rated for a maximum diving depth of 100 m. Use at or below this depth is outside the stated specification and is not recommended.

Question: How much sediment can the sampler take and how strong is its grip?
Answer: The sampler has a maximum opening of 170 mm and a maximum grabbing force of 7 kg. These values together indicate the sampler’s capacity and the upper limit of its grip strength when collecting material.

Question: Will the sampler significantly change the arm’s balance or weight?
Answer: The sediment sampler weighs 325 g and measures 178 x 120 x 85 mm. Consider these values when assessing payload balance and clearance on the Grabber Arm 2.