Datavideo AD-10 Audio delay box with 3.5mm input

Datavideo AD-10 Audio Delay Box – Up to 400ms Delay and 3.5mm Input

The Datavideo AD-10 provides precise audio and video synchronization with an easy-to-use control layout. It offers up to 400ms of delay, a 3.5mm input, and flexible input/output switching to fit different microphones and line-level sources. Compact and lightweight, the AD-10 integrates into existing workflows and indicates status with clear LED indicators.

Simple controls and clear feedback

The AD-10 uses a straightforward knob to adjust delay, so you can quickly match audio to picture. LEDs show operating status and make the device easy to monitor during shoots or live productions. Because it is compact and lightweight, you can place it in a rack, bag, or production kit without adding bulk.

Delay and synchronization

Use the delay knob to add up to 400ms of audio delay. This range gives you room to correct lip-sync and timing differences between cameras and separate audio sources. The control is designed for quick adjustments so you can react to changes in a live or recorded environment.

Flexible inputs and microphone support

• 3.5mm input included for common line or mic connections.
• Switchable between Microphone input and Audio Line input to handle different signal levels.
• Switchable Condenser / Dynamic Microphone mode to accommodate a wide range of microphone types and requirements.

Compatible outputs

• Switchable mono/stereo output lets you match downstream equipment or routing needs.
• Stereo RCA output connectors provide broad compatibility with mixers, recorders, and consumer audio gear.

Powering the AD-10

The unit runs from an external USB power supply. This makes it easy to power the AD-10 from common USB adapters, power banks, or production power systems, helping you keep setups consistent across locations.

Technical specifications

Smart FAQ

Question: What power source does the AD-10 require?
Answer: The AD-10 is powered by an external USB power supply. You can use standard USB adapters or power banks to run the unit in the studio or on location.

Question: Can I connect both microphones and line-level devices?
Answer: Yes. The AD-10 has a switchable input for Microphone or Audio Line, letting you handle mic-level signals as well as line-level sources using the 3.5mm input.

Question: Will the AD-10 work with condenser microphones?
Answer: Yes. The device includes a switch for Condenser or Dynamic Microphone modes so you can match the input to your microphone type.

Question: How do I route the delayed audio to my recorder or mixer?
Answer: Use the AD-10’s switchable mono/stereo output and the stereo RCA output connectors to connect to mixers, recorders, or other downstream equipment for straightforward integration into your signal chain.