Feelworld Monitor CUT6 6"""" recording monitor

Feelworld CUT6 6-inch Monitor – 1080P30 USB2.0 Recording with LUT

The FEELWORLD CUT6 combines on-set monitoring and real-time recording in one portable 6-inch touchscreen monitor. It records 1080P30 HD video in MP4 via USB2.0 and can record with LUT applied, making it suitable for creators who need quick turnaround for social media clips, behind-the-scenes tidbits, or on-the-go production work.

Clear 6-inch Full HD Display

The CUT6 features a 6-inch 1920x1080 full HD IPS touch screen with 8-bit color depth. The high resolution delivers detailed images and richer color, so you can confidently check focus, exposure and composition on a compact display.

Integrated Real-time Recording via USB2.0

Unlike common monitors, the CUT6 can record the HDMI input directly to a USB flash drive. It captures up to 1080P30 in MP4 format over HDMI using a USB2.0 connection. Simply plug a FAT32-formatted USB flash disk into the monitor and press the red recording key to start. Recording time depends on the storage capacity. For example, a one-hour live broadcast recording consumes about 1860M of memory.

Record with LUT Applied — Faster Post-production

When the LUT function is enabled, CUT6 records with the LUT effect baked in. This lets you finish simple content faster and reduces later color-grading steps, especially useful for quick social posts or daily content where speed matters.

Inputs, Outputs and Loop-out LUT

The monitor accepts HDMI 2.0 input and supports 4K 60Hz signals. HDMI output follows HDMI 1.4 standards and supports up to 1080p60. The HDMI loop-out can output the image with LUT applied, which is helpful for live streaming (output a cinematic look to the platform) or for on-set review by directors and clients via a wireless link.

Note: With 1080i input, there may be a missing pixel at the edge of the image in certain panoramic frames; this usually does not affect normal use.

Flexible Power Options

The CUT6 offers multiple power choices. It includes a DC OUT (8.4V) barrel output to power many DSLR and mirrorless cameras via compatible battery adapter cables (e.g., NP-FW50 Sony, LP-E6 Canon, DMW-BLF19 Panasonic). Use of a large-capacity, fully charged battery is recommended to ensure normal camera operation.

It also supports a DC 12V input (12V/1.5A adapter can be used) and features a Sony F970-style battery plate on the rear. The plate is compatible with Sony F970, F960, F950, F930, F770, F750, F730, F570, F550 and F530 batteries (battery not included).

Compact, Lightweight and Mountable

The body measures 2.3cm thick and the monitor weighs approximately 230g, making it easy to mount on camera rigs, gimbals, or magic arms for run-and-gun shooting. The CUT6 includes three standard 1/4" mounting threads (top, bottom, right side) for flexible installation and supports both horizontal and vertical monitoring.

The supplied mini hot shoe mount adapter features 180° viewing at the upper joint and 360° rotation at the base for quick attachment and versatile positioning. The mount allows fast release and attachment of the monitor, LED lights, microphones, or other accessories.

User Interface and Touch Operation

The CUT6 runs a full touchscreen UI with a new iconized menu that makes values and settings easier to read at a glance. You can use simple tap and swipe gestures for the main monitoring functions or operate via the top rotary wheel.

Basic touch instructions:

1. With monitor and touch active, double-tap the screen to enter the main menu.
2. Swipe up from the bottom to open the shortcut menu; tap an icon to open or set a function. Double-tap a shortcut, then use the < or > keys to change values.
3. On split-screen: swipe or tap the left half to adjust backlight brightness; use the right half to adjust volume.
4. Tap any blank area to exit menus.

Built-in Cooling Fan

The CUT6 includes an adjustable built-in cooling fan with low, middle and high speed settings to help manage heat during extended shooting sessions.

Professional Monitoring Tools and HDR

The flexible video OS includes an extensive suite of scopes and monitoring tools for focus, framing and exposure. Tools include waveform (RGB/YUV), RGB parade, vectorscope, RGB histogram, Y histogram, embedded audio level/phase, focus peaking, zoom, zebra, false color, safe frames and more. These can be opened individually or with one key to enable all scopes at once, making the CUT6 suitable for live production monitoring without separate expensive scopes.

The monitor also supports HDR monitoring to deliver increased dynamic range and restore true color. Available HDR modes include HLG2020, HLG709 and HLG P3.

Load and Manage 3D LUTs

The CUT6 supports a flexible 3D LUT implementation. You can use the built-in LOG-to-Rec.709 options or upload .cube files. The monitor accepts up to 50 custom LUT files internally and lets you load them via the micro SD card slot for instant selection in the field.

Audio Monitoring

The CUT6 records HDMI-embedded audio and includes a 3.5mm headphone jack for audio monitoring on set.

Use Cases

• Quick social media creators who need to record and apply LUTs directly on set.
• Live stream setups where a separate PTZ camera cannot record locally — CUT6 can capture clean footage for secondary editing.
• Directors and clients needing LUT-applied loop-out for real-time visual feedback.
• On-the-go shooters using gimbals or compact rigs who need a lightweight, high-resolution monitor.

Key Features

• 6-inch 1920x1080 full HD IPS screen
• 8-bit color depth for richer color
• Touch screen menu operation to improve shooting efficiency
• New UI interface for easier setup and quick access to values
• Real-time USB2.0 recording (MP4) up to 1080P30
• Support to record video with LUT effect baked in
• HDMI 2.0 input supports 4K60; HDMI output supports up to 1080p60
• HDMI loop-out LUT function to output LUT-applied image
• Load up to 50 custom 3D LUTs via micro SD card (supports .cube files)
• Built-in cooling fan with adjustable speeds
• DC OUT 8.4V barrel output for camera power (battery adapter cable required)
• DC 12V input and F970 battery plate compatibility
• Professional scopes: waveform, RGB parade, vector, histograms, embedded audio, focus peaking, zoom, zebra, false color, safe frames
• 3 standard 1/4" mounting threads (top, bottom, right side)
• Mini hot shoe mount adapter with 180° upper viewing and 360° base rotation
• Records HDMI audio and provides 3.5mm headphone jack

FAQ

Question: Can the CUT6 record directly from my camera and apply a LUT at the same time?

Answer: Yes. The CUT6 records HDMI input to a FAT32 USB flash drive in MP4 up to 1080P30 and can bake a LUT into the recorded file when the LUT function is enabled, speeding up post-production for simple projects.

Question: Which power options are available to keep both monitor and camera running?

Answer: The monitor offers a DC OUT 8.4V barrel output to power compatible cameras (requires a separate battery adapter cable), a DC 12V input (12V/1.5A adapter can be used), and a Sony F970-style battery plate for standby batteries (batteries not included).

Question: How do I load and switch between custom LUTs on location?

Answer: Save up to 50 custom .cube LUT files to a micro SD card and insert it into the CUT6. You can preview and instantly switch between LUTs via the touchscreen UI to maintain creative intent during shoots.

Question: Is the CUT6 suitable for live production monitoring?

Answer: Yes. The CUT6 includes professional scopes (waveform, RGB parade, vectorscope, histograms, embedded audio) and an HDMI loop-out that can output LUT-applied images for directors or streaming, making it a practical choice for live production monitoring without extra scopes.

Question: What mounting and mobility options does the CUT6 offer?

Answer: The monitor is compact and lightweight, includes three 1/4" mounting threads for flexible placement, and ships with a mini hot shoe mount adapter that features 180° upper viewing and 360° base rotation for quick attachment to cameras, gimbals or accessories.

If you need a specific compatibility check or help sourcing the correct battery adapter cable or USB media, contact us and we will assist in finding the right accessory for your setup.