Feelworld NDI20X NDI PoE PTZ Camera with 20x Optical Zoom

Feelworld NDI20X PTZ Camera – 20x Optical Zoom with NDI/IP, 3G-SDI, HDMI and PoE for Full HD Streaming

The FEELWORLD NDI20X is a full HD PTZ camera built for live video production. It delivers 20x optical zoom and supports simultaneous NDI/IP, 3G-SDI and HDMI outputs. In addition, the camera supports PoE (Power over Ethernet) so you can transmit video, control signals and power over a single cable. It suits video conferencing, education, live broadcasting, churches and other multi-camera productions.

Key features at a glance

• 20x optical zoom for capturing distant subjects while keeping image detail.
• Full HD performance up to 1080p@60fps for smooth motion and high-resolution output.
• Simultaneous 3G-SDI, HDMI and NDI/IP streaming outputs to serve different workflows.
• PoE support to simplify installation and reduce cable clutter by combining power and data.
• H.264 and H.265 video encoding for efficient streaming under limited bandwidth.
• Auto focus and smart framing to keep people and details sharp during live events.
• Advanced 2D/3D noise reduction and low-light correction for clearer images in challenging lighting.
• High-speed, silent pan/tilt with wide rotation angles to cover large rooms and stages.
• Multiple control protocols and up to 255 preset positions for repeatable shots and efficient operation.
• Double-track 3.5mm linear audio input for direct audio connections.
• Low-power sleep function to reduce power draw when idle.

Multiple video outputs and live streaming

The camera provides simultaneous HDMI, 3G-SDI and NDI/IP video outputs. This lets you connect directly to switchers, recorders and NDI-based production systems at the same time. You can stream to popular platforms such as YouTube, Facebook and Twitch using the IP/NDI output and compatible streaming tools. Note that the 3G-SDI output supports 100m transmission at 1080p60 format.

NDI|HX support for live production

FEELWORLD NDI20X implements the NDI|HX transmission protocol to deliver low-latency video and audio over a network. As a result, you reduce cabling and deployment time for studio and on-site multi-camera setups. The NDI workflow helps integrate the camera into software-based video production environments.

Power over Ethernet (PoE)

The camera supports PoE, allowing a single Ethernet cable to carry power, video/audio streaming and control data. Consequently, installations become simpler and tidier, especially in locations where running separate power lines would be difficult.

Image quality, zoom and autofocus

FEELWORLD NDI20X outputs up to 1080p at 60 frames per second to reproduce smooth motion. The 20x optical zoom provides close-up framing without digital zoom artifacts. Moreover, the camera uses auto focus and smart frame capture to keep subjects sharp and properly framed as they move during a live event.

Low light performance and noise reduction

The camera features low-light correction that automatically adjusts brightness levels to reveal details in dark or backlit scenes. In addition, advanced 2D/3D noise reduction reduces image noise while preserving clarity, producing higher signal-to-noise ratio images in difficult lighting conditions.

PTZ movement, presets and control

The NDI20X offers accurate, smooth and silent pan/tilt movement. The lens can rotate 340° horizontally (±170°) and 120° vertically (-30° to +90°), enabling multi-angle coverage of a room or stage. The camera supports 10 preset positions via the IR remote controller and up to 255 preset positions via the webserver. These presets save pan, tilt and zoom settings and enable smooth transitions between saved shots.

You can control the camera locally with the included handheld remote. Alternatively, operate it remotely using the webserver interface or compatible control systems such as the FEELWORLD L2 PLUS video switcher. Multiple control and network protocols are supported to fit various production environments.

Mounting options and typical applications

Install the NDI20X on a wall, ceiling or tripod to capture close-ups and wide coverage for your live productions. The camera targets applications such as church streaming, video conferencing, sports events and online education. Please note that the mounting bracket is not included.

In the box

• NDI20X PTZ Camera
• Remote Control
• RS232 Control Cable
• RS485 Terminal Block
• Power Adapter
• Standard Power Cable
• User Manual

FAQ

Question: Does the camera work with NDI-based production systems?
Answer: Yes. The FEELWORLD NDI20X supports the NDI|HX transmission protocol, enabling low-latency video and audio integration with NDI-compatible software switchers and production tools.

Question: Can I power the camera and send video over a single cable?
Answer: Yes. The camera supports Power over Ethernet (PoE), so a single Ethernet cable can carry power, video/audio streaming and control data, simplifying installations.

Question: How many preset positions can I store and recall?
Answer: You can store 10 preset positions using the included IR remote controller. Via the camera’s webserver interface, the camera supports up to 255 preset positions for larger or more complex setups.

Question: What outputs can I use for live production and recording?
Answer: The NDI20X offers simultaneous 3G-SDI, HDMI and NDI/IP outputs. Use 3G-SDI or HDMI to connect hardware switchers and recorders, and use the NDI/IP output to integrate the camera into network-based workflows and streaming platforms.