Description
Article no.: 25298
The Hollyland HL-TCB11 is an RJ45 tally cable. It provides a standard RJ45 connection intended for tally signal transmission between devices that use an RJ45 tally interface.
This product is a cable specifically designated as the Hollyland HL-TCB11 and identified as an RJ45 tally cable. In other words, it offers an RJ45 physical connector intended to carry tally signals where an RJ45 tally interface is required.
Use the HL-TCB11 wherever a tally connection is implemented over an RJ45 interface. It serves as the physical link between devices that exchange tally information via RJ45 ports. Because it is designed for tally use, you should use it with equipment that specifies an RJ45 tally connection.
To use the HL-TCB11, connect its RJ45 ends to the corresponding RJ45 tally ports on your devices. Ensure both devices are configured to send and receive tally signals over their RJ45 interfaces. If you are unsure whether your equipment uses an RJ45 tally interface, consult the equipment documentation or the manufacturer.
Question: What is the Hollyland HL-TCB11 used for?
Answer: The HL-TCB11 is used to provide an RJ45 physical connection for tally signal transmission between devices that implement a tally interface over RJ45.
Question: Will this cable work with my equipment?
Answer: The cable will work with equipment that requires an RJ45 tally connection. Verify that your devices support tally over RJ45 before use; if they do, the HL-TCB11 serves as the physical link between those RJ45 tally ports.
Question: How do I connect the HL-TCB11?
Answer: Plug the cable’s RJ45 ends into the RJ45 tally ports on the devices you wish to link. Make sure the devices are set up to send and receive tally signals over their RJ45 interfaces.