Hollyland Walkie-Talkie Converter 2C

Hollyland Walkie-Talkie Converter 2C – Integrate Walkie-Talkies with 4-Wire, XLR and RJ45 Audio Interfaces

The Hollyland Walkie-Talkie Converter 2C converts signals between a walkie-talkie transceiver and professional 4-wire/XLR audio systems. It provides dedicated interfaces for power, transceiver connection and both 4-wire and XLR audio IN/OUT. As a compact utility box, it lets you bridge radio handsets with broadcast or intercom gear while preserving key audio parameters.

What the 2C connects

The converter includes several physical interfaces to match common broadcast and comms setups. In particular, it supports:

• Power input via a DC (12V) power interface.
• A transceiver interface for connecting a walkie-talkie (walkie-talkie connection).
• 4-wire audio OUT and 4-wire audio IN interfaces in both XLR and RJ45 formats.

Technical specifications

How the key specs matter

The VOX threshold and gain figures show how the box handles signal levels when routing audio between a walkie-talkie and a 4-wire system. Also, the wide frequency range (100 Hz–20 kHz) and a signal-to-noise ratio above 55 dB indicate the unit is designed to keep speech clear and usable for intercom and broadcast-style setups. Meanwhile, the low power consumption (under 1W with VOX on) makes it suitable for installations where power draw is important.

Included in the box

• Walkie-Talkie Converter-Box ×1
• 2-Core Walkie-Talkie Connection Cable ×1
• 12V/2A DC2.1 Power Adapter ×1
• User Manual ×1
• Warranty Card ×1
• Connection Cable Card ×1

Practical use cases

Use the 2C whenever you need to connect a radio handset to a 4-wire audio path or XLR-based mixer/interface. For example, integrate a walkie-talkie into a broadcast intercom feed, or route radio audio into a production audio chain using the XLR or RJ45 4-wire ports. The included power adapter and connection cable let you deploy the unit quickly.

FAQ

Question: What power source does the Walkie-Talkie Converter 2C require?
Answer: It requires a DC 12V power supply, and the package includes a 12V/2A DC2.1 power adapter.

Question: Which audio and control connections are available on this converter?
Answer: The unit provides a walkie-talkie transceiver interface, 4-wire audio OUT and IN via XLR, and a 4-wire audio interface via RJ45. It also has a DC power interface for its supply.

Question: Does the unit support VOX operation and what is the VOX threshold?
Answer: Yes, VOX operation is supported. The VOX threshold is specified as >–23dBu, and the device consumes less than 1W when VOX is set to ON.

Question: What operating conditions should I observe for reliable performance?
Answer: Operate the converter within the manufacturer’s specified temperature range of 0℃ to 45℃ (32℉ to 113℉) and within the listed input level limits to maintain performance and avoid distortion.

Question: What comes in the box to get started right away?
Answer: The package includes the converter box, a 2-core walkie-talkie connection cable, the 12V/2A DC2.1 power adapter, a user manual, a warranty card and a connection cable card so you can install and power the unit immediately.

If you need specific compatibility checks or connection diagrams for your radio or intercom system, contact us and we will help verify connections and cabling for your setup.