Hollyland Wireless Tally System-8 Lights

Hollyland Wireless Tally System — 8 Lights with 800m (2,600ft) Range and 8-Hour Detachable Battery

The Hollyland Wireless Tally System (8 lights) gives you a reliable tally solution for multi-camera productions. It combines wide switcher compatibility, a sequence learning function, and adaptive frequency hopping to maintain stable transmission over long distances. The system also supports up to 16 channels and runs on a detachable battery rated for over 8 hours, enabling prolonged, uninterrupted shooting.

Key Features

• Wide Compatibility
• Sequence Learning
• 8-Hour Duration Detachable Battery
• 2,600ft (800m) Stable Transmission
• Compact & Portable
• Seamless Adaptive Frequency Hopping
• Up to 16 Channels Supported

Wide switcher compatibility and multiple ports

The Hollyland Tally System offers multiple port options to connect with a variety of switchers. It includes DB25, RJ45, and USB-C ports, making physical integration straightforward for many setups. The system lists compatibility with common switchers and software such as BMD, SONY, Roland, Datavideo, Panasonic, vMix, and DeviceWell.

Sequence learning for easier setup

The sequence learning function simplifies integration with switchers that output voltage-level signals. You can connect any compatible switcher to the tally system using a standard tally cable, and the device will learn the sequence to match your switcher’s outputs. As a result, you gain higher switcher compatibility without complex configuration steps.

Adaptive frequency hopping for stable signals

The system uses adaptive frequency hopping to handle interference in busy RF environments. It detects interference and automatically hops to the channel with lower interference. This behavior helps maintain reliable signal transmission during complicated shooting scenarios.

Long-range, stable transmission

The Wireless Tally System provides stable line-of-sight transmission up to 2,600ft (800m). This range supports productions that require long-distance tally signaling between a control room or switcher and talent or camera operators on set.

Support for multiple channels and flexible expansion

The tally box supports up to 16 channels in total. This flexibility allows you to expand or reduce the number of tally lights depending on the scale and complexity of your project. Note the port-specific limits: the DB25 port supports a maximum of 12 channels of dual-color tally, while the RJ45 port supports up to 16 channels of dual-color tally.

Detachable battery for non-stop shooting

The system ships with a detachable battery that provides over 8 hours of runtime on a single charge. If the device runs low during operation, you can replace the battery immediately to continue shooting without interruption. The batteries are also compatible with Hollyland Solidcom C1 and Solidcom C1 Pro intercom systems, allowing you to share battery resources across devices.

Compact and portable design

The tally lights are extremely lightweight for easy handling and mounting. Each light weighs 98.5g, which helps keep your rig portable and reduces load when mounting multiple units on cameras or rigs.

Technical specifications

FAQ

Question: How many tally lights are included and can I add more?

Answer: The system is presented as an 8-light configuration. You can scale tally capacity within the system’s channel limits — the system supports up to 16 channels in total, with DB25 supporting a maximum of 12 dual-color channels and RJ45 supporting up to 16 dual-color channels.

Question: What is the expected operating time and can I swap batteries during a shoot?

Answer: A single detachable battery provides more than 8 hours of runtime. You can replace the battery if it runs low to maintain uninterrupted operation during a production.

Question: Which switchers can I connect to the Hollyland tally box?

Answer: The tally system supports a wide range of switchers and software. Specifically, it lists compatibility with BMD, SONY, Roland, Datavideo, Panasonic, vMix, and DeviceWell. Connection options include DB25, RJ45, and USB-C ports to match various switcher outputs.

Question: How does the system handle signal interference on set?

Answer: The system uses adaptive frequency hopping to detect interference and automatically switch to a channel with less interference. This helps preserve stable signal transmission in complex RF environments.

Question: Are the batteries usable with other Hollyland devices?

Answer: Yes. The batteries are compatible with Hollyland Solidcom C1 and Solidcom C1 Pro wireless intercom systems, allowing you to share batteries across devices for convenience on multi-device shoots.