Kupo 483SH Short 3 Section Wind Up Stand

Kupo 483SH Short 3 Section Wind-Up Stand – Geared Column with 4.4cm Per-Turn Elevation

The Kupo 483SH is a short, 3-section wind-up stand built with a geared column and chrome plated steel construction. It provides controlled elevation through its wind-up mechanism and includes a safety cable and a leveling leg for added stability.

Key Features

• Three sections: The stand consists of three concentric sections for compact storage and stepped extension.
• Tube diameters: The outer tube and inner tubes measure 55mm, 45mm, and 38mm respectively.
• Leg diameter: The stand uses legs with a diameter of 30mm to support the column.
• Wind-up elevation: Two risers extend simultaneously, gaining 4.4cm per handle turn for smooth, consistent height adjustments.
• Safety cable: A safety cable ensures simultaneous retrieval of all sections during lowering to prevent individual section drop.
• Finish and construction: The stand is chrome plated and made of steel, paired with a geared column for controlled operation.
• Leveling: The stand includes one leveling leg to help adjust for uneven surfaces.
• Weight: Total weight of the stand is 18.8 kg.

Practical Notes

Because two risers move together, the stand gives uniform extension with each turn of the handle. The geared column provides controlled movement, while the safety cable keeps all sections linked during retrieval. Meanwhile, the single leveling leg helps adapt the stand to slightly uneven ground.

Specifications

FAQ

• Question: How does the wind-up mechanism operate on the 483SH?
  Answer: The geared column drives two risers to extend simultaneously. Each turn of the handle raises those risers by 4.4cm, giving controlled and even elevation.
• Question: What safety measures are included?
  Answer: The stand includes a safety cable that ensures all sections retrieve together when lowering, reducing the risk of a single section dropping independently.
• Question: What is the stand made of and how is it finished?
  Answer: The stand is constructed from steel and is chrome plated, paired with a geared column for steady operation.
• Question: Is there any adjustment for uneven ground?
  Answer: Yes, the stand is supplied with one leveling leg to help compensate for slight surface irregularities.
• Question: What is the weight of the 483SH and what should I note about it?
  Answer: The stand weighs 18.8 kg. Consider this mass when planning transport or handling to ensure safe lifting and movement.