Kupo 721 Jumbo Stand 2 sections

Kupo 721 Jumbo Stand 2-sections – Heavy-duty 100kg Load Capacity with Braked Wheel

The Kupo 721 Jumbo Stand 2-sections with Braked Wheel delivers a robust support solution for heavy studio and location setups. It combines chrome-plated steel construction, a direct drive gear mechanism, and an industry braked caster to give you stable, controlled movement and secure load handling up to 100kg (220lb).

Key features

• Heavy load capacity: Supports a maximum load of 100kg (220lb), suitable for demanding lighting and grip equipment.
• Working height: Reaches a maximum working height of 1.75m (5.83′) when fully extended.
• Construction: Built from chrome plated steel with aluminum legs and a chrome steel column for a balance of strength and durability.
• Two-section design: Features 2 sections and 1 riser for compact transport and flexible height adjustment.
• Direct drive mechanism: Uses a direct drive gear and auto-locking device instead of pulley and cable systems for easier, safer operation.
• Junior receiver: Includes a 28mm (1-1/8”) junior receiver with 3 eyelets to accept a wind bracing kit.
• Mobility: Equipped with an industry-standard 6” (152mm) braked caster to move the stand easily while keeping it secure when parked.
• Ergonomics and handling: Large T-handle on each riser provides greater torque for raising; dual handles on the bottom spider casting make folding the base simple and fast.
• Stability features: Leg braces are made from rectangular steel tubing and the legs measure 30 x 30 mm to maximize stability and safety.
• Maintenance-friendly assembly: The stand is assembled with bolts and nuts to allow easy maintenance and tightness adjustment instead of fixed rivets.

Design and construction details

The Kupo Jumbo Stand relies on chrome plated steel for the main structure and aluminum for the legs, combining corrosion resistance with strength. The legs are 30 x 30 mm, and the leg brace uses rectangular steel tubing to increase rigidity. These materials and design choices focus on safe, heavy-duty operation suitable for studio and location work.

Operation and safety

Rather than using traditional pulley and cable systems, this stand uses a direct drive gear mechanism coupled with an auto self-locking device. As a result, the riser lifts and locks more securely, and the design helps prevent unintentional or uncontrolled lowering of the load. The large T-handle on each riser delivers ergonomic leverage for controlled raising, while the braked 6” caster provides stable movement and secure positioning.

Practical use and maintenance

Dual handles on the bottom spider casting simplify base folding and transport. The 28mm (1-1/8”) junior receiver with three eyelets gives you the option to add a wind bracing kit for outdoor or windy conditions. Because the stand is assembled with bolts and nuts, you can perform maintenance and adjust tightness without dealing with fixed rivets, making long-term upkeep straightforward.

Frequently Asked Questions

Question: What is the maximum load the Kupo 721 Jumbo Stand can safely support?
Answer: The stand supports a maximum load of 100kg (220lb). This capacity is designed for heavy lighting and grip equipment in studio or location setups.

Question: How does the lifting mechanism differ from traditional cranking stands?
Answer: Instead of a pulley and cable system, the Kupo 721 uses a direct drive gear mechanism with an auto self-locking device. This arrangement offers easier operation and helps prevent unintended lowering of the load.

Question: Can I use the stand outdoors in windy conditions?
Answer: The junior receiver is 28mm (1-1/8”) and includes three eyelets to attach a wind bracing kit, which enables safer use in windy conditions when you add appropriate bracing.

Question: Is the stand easy to maintain and service?
Answer: Yes. The stand is assembled with bolts and nuts rather than fixed rivets, allowing you to adjust tightness and perform maintenance more easily over time.

Question: How do I move the stand around the studio?
Answer: The Kupo 721 includes a 6” (152mm) braked caster to move the stand smoothly and lock it securely once in position, providing controlled mobility for studio or location work.