Kupo CT-20MK 20"""" Master C-Stand with Turtle Base Kit -Silver

Kupo CT-20MK 20" Master C-Stand with Turtle Base – Fast 2-second leg open and collapse

The Kupo Master C-Stand with Turtle Base lets still and moving image-makers set up and break down quickly. Thanks to its patented spring ring locking system, you can open or collapse the legs in under two seconds. This design reduces leg tension so gravity does most of the work, making the stand practical for users at any skill level.

Key features and quick benefits

• Patented spring ring locking system removes tension from the legs for rapid, reliable setup and takedown.
• Turtle base design allows the riser section to be quickly removed from the base for easier transport.
• Base can be used with a stand adapter to create a low mounting position when required.
• Includes a 20" grip arm with a faceted 5/8" hex stud to keep lighting fixtures securely in place.
• Fitted with captive locking T-knobs on the column for secure adjustments that stay attached to the stand.
• Compatible with the Kupo Runway Base: remove the column and attach it to the Runway Base to create a strong, sturdy, and safe rolling stand.

How the turtle base and spring ring locking system work

First, the patented spring ring locking system relieves the legs of tension. Consequently, gravity assists when you open or collapse the legs, which makes the process fast and predictable. Second, the turtle base design separates the riser from the base so you can carry only the part you need. Therefore, you gain portability without sacrificing stability on set.

20" Grip Arm and 2.5" Grip Head details

The kit includes a 20" grip arm that uses a 2 1/2" grip head mounted on the end of a 20" piece of steel tubing. That tubing measures 5/8" (16 mm) in diameter and finishes with a faceted hex stud to help keep fixtures positioned at the arm’s end.

Moreover, the tubing surface is machined to create a rough texture, which provides a non-slip contact surface for mounted fixtures. The 2 1/2" grip head consists of rotating aluminum discs attached to a 5/8" (16 mm) receiver. These discs offer four V-shaped jaw sizes to accept common mounting studs and tubing sizes, and their toothed jaws grip mounted items securely.

Finally, the grip head features an oversized ergonomic T-handle and dedicated roller bearings that allow you to apply maximum torque comfortably and safely when tightening or repositioning gear.

What’s included in the kit

• One 20" Master C-Stand with Turtle Base
• One 2.5" Grip Head
• One 20" Grip Arm with a 5/8" hex stud

Practical uses and compatibility

Use this C-stand for lighting and grip work where quick setup, portability, and secure mounting matter. The included grip head accepts 5/8", 1/2", 3/8", and 1/4" mounting studs or tubing, so it fits a wide variety of accessories and fixtures. Also, the removable column lets you convert the stand into a rolling option by attaching it to the Kupo Runway Base.

FAQ

question: How fast can I open or collapse the legs on this C-stand?
Answer: The patented spring ring locking system removes leg tension so you can open or collapse the legs in under two seconds, letting you set up and break down quickly on set.

question: Can I use the base for low-angle mounting?
Answer: Yes. The turtle base allows the riser to be removed and the base to accept a stand adapter for low mounting positions when needed.

question: What sizes of studs and tubing does the grip head accept?
Answer: The 2 1/2" grip head has four V-shaped jaw sizes and accepts 5/8", 1/2", 3/8", and 1/4" studs or tubing, giving you broad compatibility with common accessories.

question: Can I convert this stand to a rolling stand?
Answer: Yes. You can remove the column and attach it to the Kupo Runway Base to create a strong, sturdy, and safe rolling stand suitable for transport around a set.