Kupo KAB-020 Camera Cradle

Kupo KAB-020 Camera Cradle – Convert a stand or tripod into a camera docking cradle

The Kupo KAB-020 Camera Cradle is made of European beech and converts a stand or tripod into a reliable camera docking cradle. Use it during set lighting, talent blocking, and rehearsals to hold cameras and related gear securely while you work through setup and staging.

Built-in mounting and attachment options

The cradle offers multiple mounting and attachment methods so you can adapt it to common studio hardware. It connects directly to tripods, mounts on light stands with the included adapter, and accepts rods and accessory plates for added flexibility.

• Direct tripod mount: A 3/8”-16 thread sits underneath the cradle for direct tripod attachment.
• Light stand mounting: The cradle can mount on a light stand using the included ball head adapter (KS-097LB).
• Adapter dimensions: The KS-097LB adapter measures 16mm inside diameter and 28mm outside diameter.
• Rod support: A removable white nylon rod holder fits rods measured at 15mm or 19mm in diameter.
• Accessory compatibility: Mounting slots under the cradle accept additional accessories via a u-shaped sliding plate (see the Tethermate accessories page for compatible plates).
• Secure fastening: A Velcro strap passes through the U handle to help fasten objects on the cradle securely.

How to mount and use the KAB-020

1. Choose your mounting method: attach the cradle directly to a tripod via the 3/8”-16 thread, or use the included KS-097LB ball head adapter to mount on a light stand.
2. Install rods into the removable white nylon rod holder if your setup requires 15mm or 19mm rod support.
3. Fit additional accessories using the mounting slots and a compatible u-shaped sliding plate (refer to the Tethermate accessories page to find matching plates).
4. Fasten gear with the Velcro strap through the U handle to reduce movement during rehearsals and blocking.

Specifications

FAQ

Question: Can I mount the KAB-020 directly on my tripod?
Answer: Yes. The cradle has a 3/8”-16 thread underneath that allows direct mounting to most tripods with a matching thread.

Question: Is the ball head adapter included and what are its dimensions?
Answer: Yes. The KS-097LB ball head adapter is included. It measures 16mm inside diameter and 28mm outside diameter for light stand mounting.

Question: What rod sizes does the cradle support and is the rod holder fixed?
Answer: The removable white nylon rod holder supports rods measured at 15mm or 19mm in diameter. You can remove it when rod support is not needed.

Question: How do I attach extra accessories to the cradle?
Answer: Use the mounting slots under the cradle together with a u-shaped sliding plate to add accessories. For compatible plates, check the Tethermate accessories page listed by the manufacturer.

Question: How can I secure objects on the cradle during rehearsals?
Answer: The Velcro strap runs through the U handle and helps fasten objects on the cradle securely to reduce shifting while you block talent and set lighting.