Description
Article no.: 26290
Kupo KCP-724 Wall Spreader – Accepts 2” x 4” lumber for background supports and overhead beams
The Kupo KCP-724 Wall Spreader fits cut lumber to create a secure background support or an overhead beam for hanging lighting fixtures. You mount the spreader at each end of the cut plank, fasten the lumber into the spreader ends, and then tighten the bolt for a secure fit to the wall. The design works in both horizontal and vertical positions.
Key features
- Designed specifically for use as a background support or an overhead beam to hang lighting fixtures.
- Accepts cut lumber sized 2” X 4” that you screw directly into the spreader ends.
- Includes an adjustable bolt to ensure a tight fit to the wall once the lumber is in place.
- Can be mounted and used in either horizontal or vertical positions to suit different setups.
- The square steel plate has a thickness of 0.25"(6.35mm), providing a solid contact surface.
- Product weight: 3.3kg.
Installation and typical use
Start by cutting the lumber to the required length for your background or beam. Next, screw each plank into the wall spreader ends so the lumber sits firmly in the spreader. Finally, adjust the spreader’s bolt to press the assembly tightly against the wall. You may mount the spreader horizontally for cross-beam support or vertically for upright support, depending on your rigging needs.
Specifications
| Specification | Value |
|---|---|
| Model | KCP-724 / WALL SPREADER 2” X 4” |
| Plate thickness | 0.25"(6.35mm) |
| Weight | 3.3kg |
FAQ
Question: What is the KCP-724 Wall Spreader intended for?
Answer: It is intended for use as a background support or an overhead beam to hang lighting fixtures by placing cut lumber at each end and fastening the lumber into the spreader ends.
Question: What lumber size does this spreader accept?
Answer: The spreader is designed to accept cut lumber measuring 2” X 4”, which you screw directly into the spreader ends.
Question: How do I secure the spreader to the wall?
Answer: After screwing the planks into the spreader ends, you adjust the spreader’s bolt to ensure a tight fit to the wall, creating a secure installation.
Question: Can I use the spreader in different orientations?
Answer: Yes. You can use the KCP-724 both horizontally and vertically to match your rigging or background support needs.