Kupo KCP-835D Swivel Truss Adapter w/ 2 Inch Couplers & Junior Pin

Kupo KCP-835D Swivel Truss Adapter – 2 Inch Couplers & 1-1/8" Junior Pin for Jumbo Stands

The Kupo KCP-835D swivel adapter lets you mount a Jumbo stand on a truss so you can install heavy lighting fixtures from above. It uses four aliscaff clamps that fit 48–51 mm tubes and trusses. The adapter converts a standard Jumbo stand into an arm stand quickly and securely.

Key features

• Swivel adapter designed for mounting on trusses and tubes.
• Four aliscaff clamps that accommodate 48–51 mm tubes and trusses.
• Frame connects to a swivel fork with a 1-1/8" (28 mm) junior pin for mounting on Jumbo stands.
• Sturdy aluminum frame constructed from 6061 T6 high tensile aluminum extrusions.
• Four high-strength aluminum extrusion couplers located on one side of the frame, with 25 cm between the two couplers (center to center), to securely lock the system.
• Compact footprint: 29 cm long and 29 cm wide.

How it works and typical use

You mount the adapter on a truss using the four aliscaff clamps that fit 48–51 mm tubing. Then attach the adapter’s swivel fork to a Jumbo stand via the 1-1/8" (28 mm) junior pin. In this configuration, the Jumbo stand functions as an arm stand and allows you to suspend lighting fixtures from above on the truss.

Because the frame uses 6061 T6 high tensile aluminum extrusions and houses four high-strength couplers on one side, the system locks in place and remains stable when installed. The 29 cm × 29 cm frame size keeps the adapter compact while providing the connection points needed for secure mounting.

Specifications

FAQ

• Question: Is this adapter compatible with standard truss tubing?
  Answer: Yes. It uses four aliscaff clamps that fit 48–51 mm tubes and trusses, so it works with trussing in that size range.
• Question: How do I attach the adapter to a Jumbo stand?
  Answer: The frame connects to the swivel fork via a 1-1/8" (28 mm) junior pin, which mounts directly on a Jumbo stand to convert it into an arm stand.
• Question: What material is the frame made of?
  Answer: The frame and components use 6061 T6 high tensile aluminum extrusions for strength and durability.
• Question: How are the couplers arranged?
  Answer: On one side of the frame there are four high-strength aluminum extrusion couplers, and the specified spacing is 25 cm between the two couplers (center to center), which helps lock the system securely.