Kupo KD-C50P Kupole Ceiling Adapter

Kupo KD-C50P Kupole Ceiling Adapter – Connects Kupole to Drop Ceiling Frames for 40 mm Pipes

The Kupo KD-C50P Kupole Suspended Ceiling Adapter is designed to connect a Kupole system to a drop ceiling frame using the supplied adapter. It provides a practical solution when you need to suspend Kupole components from a light steel frame or similar drop ceiling construction.

Key features

• Applicable pipe diameter 40 mm
• Replaceable rubber pads on the top of the pole
• Suitable for occasions where the ceiling is light steel frame
• When the central slot is used to make the castings fit into the pipe fittings, tighten the screws and stretch the pipe surface outwards to achieve a fixed effect

How it works and where to use it

Use this adapter when you need to suspend Kupole from a drop ceiling frame. The adapter fits onto pipes with a 40 mm diameter, allowing straightforward attachment to standard Kupole pipe fittings. Installers place the casting into the pipe fittings and use the central slot to align parts precisely. Then tighten the screws so the pipe surface expands outward, creating a secure, fixed connection.

The adapter suits situations where the ceiling structure is a light steel frame. In such environments, the adapter gives a reliable anchor point for Kupole components while avoiding direct modification of the ceiling itself.

Installation and maintenance notes

Installers should align the casting in the central slot before tightening screws to ensure the castings fit correctly into the pipe fittings. Tightening causes the pipe surface to expand outward and lock in place, which secures the assembly. The top of the pole includes replaceable rubber pads. These pads help protect the ceiling frame and provide grip; replace them as needed to maintain secure contact and to reduce wear on both the adapter and the ceiling frame.

Specification

FAQ

Question: What pipe size does the KD-C50P accept?
Answer: The adapter is designed for pipes with a 40 mm diameter, which is the applicable pipe size specified for this model.

Question: Can I use this adapter on any ceiling type?
Answer: This adapter is suitable for situations where the ceiling is a light steel frame or similar drop ceiling construction. It is intended for use with drop ceiling frames rather than solid concrete or heavy structural ceilings.

Question: How does the adapter achieve a secure fit?
Answer: The adapter uses a central slot to position the casting inside the pipe fitting. When you tighten the screws, the pipe surface is stretched outward, which locks the casting and creates a fixed, secure connection.

Question: Are the rubber pads replaceable and why does that matter?
Answer: Yes, the top-of-pole rubber pads are replaceable. They protect the ceiling frame, increase grip, and reduce wear on contact surfaces. Replacing worn pads helps maintain a reliable installation over time.