Kupo KS-023H Hex Mounting Plate 3/8""""-16m with 5/8"""" Hex Stud

Kupo KS-023H Hex Mounting Plate 3/8"-16M with 5/8" Hex Stud – secure non-rotating mount for 3/8"-16 receivers

The Kupo KS-023H Hex Mounting Plate lets you mount tripod heads and other accessories that use a 3/8"-16 receiver. It features a 5/8" hex stud that fits hex sockets and is designed not to rotate once seated. Use it when you need a reliable, fixed connection between heads and clamps or arms.

Key features

• Designed for mounting tripod heads or other accessories with a 3/8"-16 receiver.
• Works with Convi clamps, Super clamps and Mafer clamps; the hex design prevents rotation in hex sockets.
• Enables you to mount camera heads and video heads in remote or hard-to-reach places where a standard tripod may not fit.
• Securely lock the head on the plate using the three locking set screws that hold the head in place.
• The 3/8"-16M threaded stud also serves to mount other accessories, such as arms, where that thread is required.

Compatibility and use cases

Use the KS-023H whenever you need to adapt a 3/8"-16 head to a hex socket or 5/8" stud system. For example, it pairs well with Convi clamps, Super clamps and Mafer clamps. Because it will not rotate in hex sockets, you can trust the connection to stay stable during setup and use.

How to install

1. Align the 3/8"-16 receiver of your head or accessory with the KS-023H plate.
2. Seat the 5/8" hex stud into the matching hex socket on your clamp or arm.
3. Tighten the three locking set screws to lock the head securely to the plate.
4. Confirm the plate does not rotate in the hex socket before use.

Practical benefits

This mounting plate gives you flexibility on set. You can place camera heads and video heads in locations where a standard tripod would be impractical. Also, the 3/8"-16M stud doubles as a mounting point for additional accessories like arms, allowing for modular setups.

FAQ

Question: What heads or accessories can I mount on the KS-023H?
Answer: You can mount tripod heads or any accessory with a 3/8"-16 receiver. The plate provides a standard 3/8"-16 interface for those items.

Question: Which clamps work with this mounting plate?
Answer: The plate works well with Convi clamps, Super clamps and Mafer clamps, and it is designed to sit in hex sockets without rotating.

Question: How do I secure a head to the plate?
Answer: Secure the head using the three locking set screws on the plate. Tightening these screws locks the head firmly in place.

Question: Can the 3/8"-16M stud be used for other accessories?
Answer: Yes. Besides mounting heads, the 3/8"-16M threaded stud can be used to attach other accessories such as arms where that thread is required.