Kupo KS-090 TVMP TV to Motion Picture adapter
- VAT free purchase available at checkout.
- BrandKupo
Description
Article no.: 26040
Kupo KS-090 TVMP TV to Motion Picture adapter – Fits 1-1/8” junior receiver or 5/8” baby stud
The Kupo KS-090 TVMP adapter converts TV-style mounts to motion picture hardware. It allows TV fittings to seat securely into a 1-1/8” (28mm) junior receiver or into a 5/8” (16mm) baby stud. This makes it useful when you need to use TV lights or fixtures with common motion-picture stands and rigging.
What the adapter does
The adapter fits onto the yoke of a lighting fixture. Then, you can mount that fixture on a stand or insert it into a junior receiver on a clamp that is rigged to a truss. In short, the KS-090 bridges TV-style yokes and motion-picture mounting points so you can mix and match equipment on set.
Key features
- Accepts 1-1/8” (28mm) junior receiver connections.
- Accepts 5/8” (16mm) baby stud connections.
- Designed to attach on the yoke of a lighting fixture.
- Supports mounting to a stand or fitting into a junior receiver of a clamp rigged on a truss.
- Included top bolt thread size: 1/2”-13, for compatible top-threaded attachments.
Typical use cases
- Attach a TV-light yoke to a motion-picture stand that uses a junior receiver.
- Mount a TV-style fixture via a baby stud when a 5/8” connection is required.
- Use with a clamp on truss by inserting the adapter into the junior receiver of the clamp.
| Specification | Details |
|---|---|
| Fits into | 1-1/8” (28mm) junior receiver or 5/8” (16mm) baby stud |
| Designed to attach | Yoke of a lighting fixture that can be mounted to a stand or fit into a junior receiver of a clamp rigged on a truss |
| Top bolt thread size | 1/2”-13 |
FAQ
Question: Will this adapter let me use a TV light on a motion-picture stand?
Answer: Yes. The KS-090 adapts TV-style yokes so they fit into motion-picture mounting points, specifically a 1-1/8” junior receiver or a 5/8” baby stud.
Question: Can I mount the adapter to a truss?
Answer: Yes. You can insert the adapter into the junior receiver of a clamp that is rigged on a truss, allowing the fixture attached to the yoke to be supported from the truss.
Question: What top bolt thread should I expect on this adapter?
Answer: The included top bolt thread size is 1/2”-13. Check your accessory threads to ensure compatibility.
Question: How do I confirm compatibility with my equipment?
Answer: Measure the receiver or stud you plan to use. If it is a 1-1/8” (28mm) junior receiver or a 5/8” (16mm) baby stud, the KS-090 is designed to fit. Also verify that your fixture mounts via a yoke that can accept the adapter.