Kupo KS-118BT Stand Hanger For Lightweight Stand
- VAT free purchase available at checkout.
- BrandKupo
Description
Article no.: 26405
Kupo KS-118BT Stand Hanger for Lightweight Stand – 118cm Rack with 10 Baby Stud Holders
The Kupo KS-118BT is a durable stand hanger designed to store and display lightweight stands. It provides a dedicated 118cm (46.5") rack with ten baby stud holders, so you can keep stands organised and accessible in a studio, workshop or on a door rack.
Key features
- Built from robust steel for strength and durability.
- Matte-black surface finish for a discreet, professional look.
- 118cm (46.5") overall length with 10 baby stud holders on the rack.
- Three dia. 8.5mm holes drilled at 16'' (40.6mm) intervals for easy and firm mounting to a wall or door rack.
- Extra dia. 10.5mm holes in each end to connect with Kupo four way clamp (KCP-950) or 3 way clamp (KCP-930).
- Compatible with any tube size from 35 to 50mm when used with the clamps mentioned above.
- Four versions of the stand hanger are available to meet different professional requirements.
- Recommended: mount a lumber backing (2x2 or 2x4) behind the hanger to protect the wall and prevent scratches.
Use cases and compatibility
Use the KS-118BT as a practical storage and display solution for light stands. You can mount the hanger directly to a wall or a door rack by using the three 8.5mm holes. Alternatively, connect with Kupo clamps (KCP-950 or KCP-930) through the 10.5mm end holes to store tubes and stands with diameters from 35 to 50mm. In either setup, the rack keeps equipment organised and ready for quick access.
Installation notes
When installing, position the hanger where it can hold stands safely and without interference. Because the KS-118BT mounts to a wall or door rack, Kupo recommends placing lumber (2x2 or 2x4) behind the hanger to avoid wall scratches and to provide extra support. The unit’s three pre-drilled 8.5mm holes simplify secure mounting.
| Specification | Details |
|---|---|
| Model | KS-118BT |
| Length | 118cm (46.5") |
| Material | Robust steel |
| Finish | Matte-black surface |
| Mounting holes | Three dia. 8.5mm holes at 16'' (40.6mm) intervals |
| End holes | Extra dia. 10.5mm holes in each end |
| Clamp compatibility | Kupo KCP-950 (four way) and KCP-930 (3 way) |
| Tube size compatibility | 35 to 50mm (with clamps) |
| Baby stud holders | 10 holders on the rack |
| Versions available | Four versions to meet different professional requirements |
| Weight | 2.85kg |
FAQ
Question: How do I mount the KS-118BT to a wall or door rack?
Answer: Use the three dia. 8.5mm pre-drilled holes to mount the hanger firmly to a wall or door rack. For added protection and support, place lumber (recommended 2x2 or 2x4) behind the hanger to prevent wall scratches.
Question: Can I use clamps with this hanger to store larger tubes or stands?
Answer: Yes. The hanger has extra dia. 10.5mm holes in each end designed to connect with Kupo clamps KCP-950 (four way) or KCP-930 (3 way). With those clamps, you can store tubes from 35 to 50mm.
Question: How many baby stud holders does the KS-118BT provide and what are they for?
Answer: The KS-118BT provides 10 baby stud holders along the rack. These holders let you store and organise multiple lightweight stands and accessories neatly across the 118cm length.
Question: Are there different versions if I need another size or configuration?
Answer: Yes. There are four versions of the stand hanger available to meet different professional requirements. Choose the version that best fits your storage needs and mounting setup.