Kupo KS-161 Universal Track End

Kupo KS-161 Universal Track End – 2” (48–50mm) Rail Support for Sliders and Dollies

The Kupo KS-161 Universal Track End is designed specifically for sliders and dollies. It accepts 2” (48–50mm) rails and provides multiple mounting options for flexible rigging. The set ships as two brackets, allowing you to support both ends of a rail system or create a low-angle setup on the floor.

Key features

• Accepts 2” (48–50mm) rail diameter suitable for many slider and dolly rails.
• TVMP adapters located at the center of the bracket allow mounting to lighting stands that include a baby stand or junior receiver.
• U-shaped structure enables the brackets to free-stand on the floor, which is ideal for low-angle shooting.
• Two adjustable rail holders provide an adjustable usable distance between the rails (center to center) from 19.7cm to 40.2cm.
• Additional M10 holes are drilled into each end of the bracket to increase stability by mounting couplers with the pipes.
• Supplied as a set of 2 brackets so you can mount both ends or use paired setups.

Practical uses and benefits

Use the KS-161 to convert standard lighting stands into rail supports thanks to the TVMP adapters. Alternatively, place the brackets directly on the floor for stable, low-angle shots without extra stands. Also, adjust the distance between rails quickly to match different rail widths, and add couplers through the M10 holes for extra rigidity when needed.

How to install

1. Insert the 2” (48–50mm) rail into the U-shaped holders.
2. Adjust each rail holder to the required center-to-center distance within the 19.7cm–40.2cm range.
3. Mount the TVMP adapter into a compatible baby or junior receiver on a lighting stand if elevated support is needed.
4. For added stability, use the M10 holes at each end of the bracket to secure couplers and pipes as required.

FAQ

Question: Can I use the KS-161 with standard slider rails?
Answer: Yes. The KS-161 accepts 2” (48–50mm) rails commonly used on sliders and dollies, and its adjustable holders let you set the center-to-center spacing between 19.7cm and 40.2cm.

Question: How can I elevate the brackets instead of placing them on the floor?
Answer: The brackets feature TVMP adapters at the center that allow mounting to lighting stands equipped with a baby stand or junior receiver, so you can raise the rails to the desired height.

Question: Do the brackets allow for extra reinforcement?
Answer: Yes. Each end of the bracket has M10 holes drilled for mounting couplers and pipes, which improves overall stability when you need a firmer mounting solution.

Question: How many brackets are included in the set?
Answer: The KS-161 is supplied as a set of 2 brackets, enabling you to support both ends of a rail or build paired configurations for your slider or dolly needs.