Kupo KS-216 2"""" Two Hook Stud

Kupo KS-216 Two Hook Stud – 50mm Aluminum Tube with M16 Thread for Tow Eye Mounting

The Kupo KS-216 Tow Hook Stud provides a solid mounting point for camera support gear that needs to attach to a vehicle’s tow eye. Constructed from aluminum, the stud gives a reliable support arm for a variety of mounting accessories. It installs directly to the car’s tow eye bolt using the supplied M16 male thread and washers.

Key features and benefits

• Aluminum construction for a balance of strength and weight.
• 50mm diameter tube that accepts mounting gear designed for that size.
• M16 male threaded stud supplied for secure installation to the vehicle tow eye bolt.
• Includes washers to ensure a correct fit and load distribution when mounted.
• Practical note: the M16 screw nut fits a 24mm wrench socket, which simplifies installation and removal.

Typical uses

Use the KS-216 as a support arm when you need to connect mounting equipment to a vehicle. For example, attach couplers or any accessory that mounts to a 50mm tube. Because it mounts at the tow eye, it works well for rigs and temporary vehicle-based support setups where a robust, detachable anchor point is required.

What’s included

• M16 male threaded tow hook stud
• Washers for mounting to the tow eye bolt

Specifications

Smart FAQ

Question: How do I mount the KS-216 to my vehicle?
Answer: Thread the M16 male stud into the car’s tow eye bolt and use the supplied washers to distribute load and ensure a secure fit. Tighten the M16 nut with a 24mm wrench socket as noted.

Question: What can I attach to the 50mm tube?
Answer: You can attach couplers and any mounting gear designed for a 50mm tube. The KS-216 serves as a standard support arm for accessories that match that diameter.

Question: Is the KS-216 suitable for field or vehicle use?
Answer: Yes. The stud is specifically designed to mount at a vehicle tow eye, providing a detachable and practical anchor point for on-location vehicle-based rigs.

Question: What tools will I need for installation?
Answer: A 24mm wrench socket is required to fit the M16 screw nut. Additional common hand tools may help for final tightening and adjustment during installation.