Kupo KS-249 Safety Attachment For Easyrig Stabilizer

Kupo KS-249 Safety Attachment for Easyrig – Black Aluminum Mount with Safety Eye for Back Support

The Kupo KS-249 Safety Attachment secures to Easyrig stabilizers and adds a dedicated safety connection point. You attach it directly to the central support bar and use the built-in eye to connect a spring hook or safety rope. This provides a simple, mechanical way to add back support when you work in exposed or elevated environments.

Key features

• Constructed from two black aluminum parts for a rigid connection.
• Mounts to the central support bar and is tightened with the two supplied screws.
• Equipped with an eye on one end to allow hooking with a spring hook or tying a safety rope.
• Intended for use as a back support connection when working on rooftops, poolside areas, cliffs, or other exposed locations.
• Lightweight component with a listed weight of 250g.

Use cases and benefits

Use the KS-249 when you need a secure anchor point on your Easyrig stabilizer. For example, you can hook a spring clip or tie a safety rope to the attachment to help prevent falls or add a secondary support line while shooting in risky locations. Because it mounts to the central support bar, it keeps the safety connection close to the Easyrig’s structure and your body.

Installation notes

1. Place the two black aluminum parts around the central support bar.
2. Align the mounting holes and insert the two supplied screws.
3. Tighten the screws securely to ensure the attachment remains fixed to the bar.
4. Use the eye on the attachment to hook a spring hook or tie a safety rope as required for your working environment.

Always check the tightness of the screws and the condition of any safety rope or spring hook before use.

What’s in the box

• Two black aluminum parts (the attachment body).
• Two supplied screws for mounting.

Technical specifications

FAQ

Question: Will the KS-249 fit my Easyrig model?
Answer: The KS-249 is designed for Easyrig stabilizers and mounts to the central support bar. If you are unsure about fit for a specific Easyrig model, contact us with your Easyrig model information and we will help confirm compatibility.

Question: How do I attach the safety line or hook?
Answer: Attach a spring hook to the eye on the end of the KS-249 or tie a safety rope through the eye. The attachment provides a single, dedicated connection point intended for rear support when working in exposed environments.

Question: What hardware is included for installation?
Answer: The attachment ships with two supplied screws used to clamp the two black aluminum parts onto the Easyrig central support bar. These screws are the only hardware required for mounting the KS-249 to the bar.

Question: How much weight does the attachment add to my rig?
Answer: The KS-249 has a listed weight of 250g. Use this value when planning load and balance for your Easyrig setup.