Kupo KS-699 Mitchell To Pipe Mount
- VAT free purchase available at checkout.
- BrandKupo
Description
Article no.: 26644
Kupo KS-699 Mitchell to Pipe Mount – Convert Mitchell Base to 48–51mm Pipe for Camera Offset
The Kupo KS-699 Mitchell to Pipe mount converts a standard Mitchell base into a Dia.48~51mm pipe mounting. You can use it to offset your camera setup when fitting a Pipe Clamp on Paddle Mount (KS-382). This mount gives you a simple way to adapt a Mitchell base for pipe installations without changing your core support gear.
Key features
- Converts a standard Mitchell base to Dia.48~51mm pipe mounting for easy adaptation to pipe-based rigs.
- Designed for offsetting camera setups with a Pipe Clamp on Paddle Mount (KS-382), enabling flexible positioning.
- Unique angle adjustment mounting design allows changing the mounting position in 45-degree increments for repeatable orientation.
- Stainless steel Speed Wing Nut enables quick hand tightening for fast setup changes.
- Hex top on the Speed Wing Nut accepts a 19mm wrench when a firmer, more secure tightening is required.
- Weight: 3.2kg, providing a substantial, stable adapter for use in production environments.
How it works
Attach the KS-699 to a standard Mitchell base and then mount it to a pipe with a diameter between 48 and 51mm. The clamp-on bracket uses an angle-adjustment design so you can rotate and lock the mounting position in 45-degree steps. For quick changes, tighten the stainless steel Speed Wing Nut by hand. If you need a firmer lock, use a 19mm wrench on the hex top.
| Specification | Details |
|---|---|
| Model | KS-699 |
| Function | Mitchell to pipe mount |
| Compatible pipe diameter | Dia.48~51mm |
| Compatible accessory | Pipe Clamp on Paddle Mount (KS-382) |
| Angle adjustment | Change mounting position every 45 degrees |
| Speed Wing Nut | Stainless steel; hand-tighten or use 19mm wrench on hex top |
| Weight | 3.2kg |
FAQ
Question: Which pipe sizes does the KS-699 fit?
Answer: It fits pipes with a diameter of 48 to 51 mm (Dia.48~51mm), as specified for converting a Mitchell base to pipe mounting.
Question: Can I use this mount to offset my camera with the KS-382 Paddle Mount?
Answer: Yes. The KS-699 is designed to allow offsetting when used with a Pipe Clamp on Paddle Mount (KS-382), enabling flexible camera positioning.
Question: How do I tighten the mount and secure the position?
Answer: You can quickly hand-tighten the stainless steel Speed Wing Nut for fast changes. For a firmer, more secure hold, use a 19mm wrench on the hex top of the wing nut.
Question: Is the mounting angle adjustable while in use?
Answer: Yes. The mount’s angle adjustment design lets you change the mounting position in fixed 45-degree steps, so you can set repeatable orientations during setup.