Kupo KS-832 Pipe Clamp On Paddle

Kupo KS-832 Pipe Clamp On Paddle – Convert Mitchell Base to Dia.48~51mm Pipe Mount

The Kupo KS-832 lets you convert a standard Mitchell base into a pipe mount for Dia.48~51mm tubing. Use it to offset your camera setup when pairing with the Pipe Clamp on Paddle Mount (KS-382). The KS-832 gives you a simple mechanical solution for changing mounting geometry without replacing your baseplate.

Key features

• Converts a Mitchell base to Dia.48~51mm pipe mounting for offset applications.
• Unique angle adjustment mounting design that allows repositioning in 45° increments.
• Stainless steel Speed Wing Nut for quick hand tightening.
• Hex top end on the Speed Wing Nut accepts a 19mm wrench for firmer tightening when required.

How it helps on set

Mount the KS-832 to gain lateral or offset support using standard pipe sizes. Then pair it with the KS-382 Pipe Clamp on Paddle Mount to achieve the desired camera offset. Because you can change the mounting position every 45°, you get predictable, repeatable positioning for common rigging needs.

Adjustment and tightening

First, set the desired 45° index position using the angle adjustment design. Next, secure the assembly quickly with the stainless steel Speed Wing Nut by hand. Finally, if you need the firmest possible lock, use a 19mm wrench on the hex top end of the nut.

Specifications

FAQ

Question: Is the KS-832 compatible with the Kupo KS-382 Pipe Clamp on Paddle Mount?

Answer: Yes. The KS-832 converts a Mitchell base to Dia.48~51mm pipe mounting specifically to allow offsetting your camera setup when used with the KS-382.

Question: How do I change the mounting angle?

Answer: The unit uses a unique angle adjustment mounting design that lets you change the mounting position in 45° increments, giving predictable and repeatable orientation options.

Question: What tightening options are available for securing the clamp?

Answer: You can quickly tighten the stainless steel Speed Wing Nut by hand for fast setup. If you require the firmest possible fastening, use the hex top end on the nut with a 19mm wrench.