Kupo KS-CB13 Arri Style 3/8""""-16 Spacer For Vision Lock

Kupo KS-CB13 Arri Style 3/8”-16 Spacer for Vision Lock – Attach Vision Lock to ARRI-style 3/8”-16 anti-twist mount

Description

The Kupo KS-CB13 is a spacer machined from CNC blacked anodized aluminum. It allows you to attach the bottom of a Vision Lock to an ARRI-style 3/8”-16 anti-twist accessory mount. The spacer adds the correct locating interface so the Vision Lock aligns with ARRI 3/8”-16 locating holes.

Installation requires removing the three screws fixed to the bottom of the Vision Lock and replacing them with the supplied screws that secure the spacer. Once fitted, the spacer engages the ARRI-style locating holes and uses an anti-twist pin. As a result, the Vision Lock will not rotate, even if you mount a heavier monitor.

Key use cases

• Convert the base of a Vision Lock to fit ARRI-style 3/8”-16 accessory mounts.
• Provide an anti-rotation interface for monitors and accessories mounted via ARRI locating holes.
• Use on rigs where a secure, anti-twist connection is required between Vision Lock and ARRI-style mounts.

Installation steps

1. Remove the three screws fixed to the bottom of the Vision Lock.
2. Position the KS-CB13 spacer on the bottom of the Vision Lock.
3. Attach the spacer with the supplied screws.
4. Install the assembly into the ARRI-style 3/8”-16 locating holes; the anti-twist pin will engage to prevent rotation.

Package contents

• 1 piece of Spacer
• 1 piece of 3/8”-16 Screw
• 3 piece of M2 Screws

Specifications

FAQ

Question: Will this spacer fit my Vision Lock?

Answer: The KS-CB13 is designed specifically to attach to the bottom of Vision Lock and adapt it to ARRI-style 3/8”-16 locating holes.

Question: How do I install the spacer?

Answer: Remove the three screws fixed on the bottom of the Vision Lock, position the spacer, and attach it using the supplied screws. Then install the assembly into ARRI-style 3/8”-16 locating holes so the anti-twist pin engages.

Question: What hardware is included in the package?

Answer: The package includes one spacer, one 3/8”-16 screw, and three M2 screws—everything needed to attach the spacer to the Vision Lock base.

Question: Will the spacer prevent rotation when I mount a heavier monitor?

Answer: Yes, the spacer features an ARRI-style anti-twist pin so the Vision Lock will not rotate even if a heavier monitor is mounted.