Kupo KSC-140 Universal Camera Ball Leveling Head

Kupo KSC-140 Universal Camera Ball Leveling Head – 55mm Solid Ball for Fast, Secure Camera Locking

The Kupo KSC-140 is a universal camera ball leveling head designed to lock your camera position quickly and securely. It features a single 55mm diameter solid ball and a tightening knob that lets you orient and fix your camera with ease. The unit combines a robust base plate with a versatile top mounting slot for common industry accessories.

Solid ball head and easy locking

The head uses one 55mm diameter solid ball for smooth, stable movement. In addition, the tightening knob lets you clamp the ball in place quickly. As a result, you can adjust framing or balance and then secure the camera reliably.

Sturdy aluminum cheese plate base

The base is a durable 3/8” thick aluminum cheese plate measuring 8” x 8” (203mm x 203mm). It includes the industrial standard 3/8” holes, which are spaced every 1”. Therefore, you get multiple mounting positions for rigs, cages, or other support hardware.

Top mounting plate and ARRI compatibility

The top mounting plate features a 3/8” (10mm) slot that runs 100mm in length. This slot allows the head to accept a standard ARRI sliding base and similar sliding accessories, improving flexibility when balancing larger camera setups.

Load capacity

The KSC-140 supports a maximum load of 34kg, allowing it to handle a wide range of professional camera and accessory configurations within that limit.

Key features

• One 55mm diameter solid ball head for stable articulation
• Tightening knob for quick and convenient locking of camera position
• 3/8” thick aluminum cheese plate base, 8” x 8” (203mm x 203mm)
• Industrial standard 3/8” holes, spaced every 1” for flexible mounting
• Top mounting plate with 3/8” (10mm) slot, 100mm length for ARRI sliding base compatibility
• Maximum load capacity: 34kg

Typical use cases

Use the KSC-140 when you need a robust, adjustable interface between your camera and support gear. For example, mount it on a rig or platform where multiple 3/8” attachment points are required, or pair it with an ARRI sliding base to fine-tune camera position along the slot. Because it locks quickly, it suits setups that require frequent repositioning followed by secure clamping.

FAQ

Question: What type of ball does the KSC-140 use?
Answer: It uses a single 55mm diameter solid ball head designed for smooth articulation and reliable clamping.

Question: How does the plate attach to other gear?
Answer: The base is an 8” x 8” aluminum cheese plate with industrial 3/8” holes spaced every 1”, providing multiple attachment points for rigs, platforms, and accessories.

Question: Can I use an ARRI sliding base with this head?
Answer: Yes. The top mounting plate includes a 3/8” (10mm) slot that is 100mm long, which allows use with a standard ARRI sliding base.

Question: What is the maximum load capacity?
Answer: The KSC-140 supports a maximum load of 34kg, which you should consider when planning your camera and accessory setup.