Nanlite PavoSlim 2.6m DC cable for 60/120B,C and CL

Nanlite PavoSlim 2.6m DC Cable — 2.6m Extension for PavoSlim 60/120B, C and CL

What this cable does

This 2.6m DC extension cable connects the PavoSlim fixture to its control unit, increasing the distance between the fixture body and the controller. The PavoSlim fixture already includes a 0.4m DC connection cable attached to the fixture body. You use this 2.6m cable to reach the control unit or to extend an existing connection for more flexible placement.

Key features and benefits

• 2.6-meter DC extension cable designed specifically for PavoSlim fixtures.
• Works with the PavoSlim’s built-in 0.4-meter cable to reach the control unit.
• Can be added again (stacked) with another 2.6m cable to extend total reach.
• Enables a maximum total cable length of 5.6 meters when using one additional 2.6m extension together with the fixture’s 0.4m cable.
• Provides flexible placement and installation options for different setups.

Compatibility

This extension is intended for Nanlite PavoSlim models listed in the product title: 60/120B, C and CL. Use it whenever you need to increase the distance between the fixture body and its control unit while maintaining the original DC connection system.

How to use

1. Connect the fixture’s built-in 0.4m DC cable to the 2.6m extension cable.
2. Route the 2.6m cable to the control unit, or add a second 2.6m extension to reach a further distance.
3. With one additional 2.6m extension, you can achieve a total cable run of 5.6m from fixture to control unit.

FAQ

Question: Can I use this 2.6m cable with any PavoSlim model?
Answer: This extension is intended for the PavoSlim models listed (60/120B, C and CL) as specified in the product title.

Question: How do the cable lengths add up when I use an extra extension?
Answer: The fixture has a 0.4m cable. Adding one 2.6m extension yields 3.0m. Adding a second 2.6m extension gives a total of 5.6m from fixture to control unit.

Question: What installation flexibility does this cable provide?
Answer: By extending the distance between the fixture and control unit, the cable allows you to place the light or the controller where it best fits your setup, supporting varied mounting and routing needs.

Question: Do I need any additional adapters to connect this cable?
Answer: The cable is designed to connect directly to the PavoSlim’s built-in 0.4m DC cable and the corresponding control unit connection for the listed models; no extra adapters are mentioned in the product information.