Nanlux Evoke 1200B Spot Light with FL-35YK Fresnel Lens and Flight Case

Nanlux Evoke 1200B Spot Light with FL-35YK Fresnel Lens and Flight Case – High output bi-color 2700K–6500K for film & TV

The Nanlux Evoke 1200B kit combines a high-output bi-color spot light with the FL-35YK Fresnel lens and a dedicated flight case. It targets cinematographers and gaffers working in film and TV production who need a powerful, flexible light that adapts to changing color temperatures and on-set conditions.

Extreme output and flicker-free performance

The Evoke 1200B delivers an extreme output of 61.030 lux @ 3m, 5600K (with reflector). It outperforms common fixtures by beating a 1.8K HMI Par or a 2.5K fresnel, while maintaining LED advantages such as high luminous efficiency and no warm-up time. Additionally, the fixture includes Nanlux’s proven flicker-free functionality for consistent performance across the Evoke line.

Wide bi-color range and accurate color rendering

The fixture offers a broad CCT range from 2700K to 6500K, enabling seamless simulation of natural light from sunrise through daylight to sunset. You can change CCT with a simple knob, eliminating the need for CTO/CTB gels and speeding up on-set workflows. The Evoke 1200B also provides constant output across the CCT range so color tuning does not cause intensity shifts.

Color quality metrics include an average CRI of 96 and an average TLCI of 97, and the product has been tested and calibrated to deliver reliable color rendition for professional shoots. The product also references TM-30 ratings as part of its color quality validation.

Robust weather protection and reliability

The full fixture and its power supply are built to an IP54 rating with a hermetically sealed structure to resist rain, snow and dust. This protection helps you use the light in demanding outdoor conditions without exposing internal electronics to the elements.

Precise control and smooth dimming

Nanlux equips the Evoke 1200B with a simplified, intuitive menu presented on a 2.8-inch display. You get precise dimming from 0–100% in 0.1% increments, with low-output jumps between 0–1% eliminated for smooth fades. For industry-standard control, five dimming curves are available via DMX: LINEAR, EXPONENT, LOGARITHM, S CURVE and GAMMA 2.2.

Flexible wired and wireless connectivity

The Evoke 1200B supports comprehensive wired and wireless control options to integrate into various on-set workflows. You can connect to a DMX console with the onboard 5-pin XLR for stable wired control. For wireless operation, the fixture includes a built-in LumenRadio TimoTwo module with both transmitting and receiving functions for easy and stable mesh connections.

Additionally, the Evoke 1200B connects to the NANLINK lighting control system via built-in 2.4G or Bluetooth, so you can operate fixtures from the NANLINK app. A wire control port on the lamp head provides an alternative wired controller option.

Thermal design and fan operation for long life

Nanlux designed a focused thermal management system to optimize heat dissipation while keeping the fixture housing compact. The system aims to extend LED lifetime and maintain higher efficiency under sustained operation.

The fan control system offers four operation modes to match different shooting scenarios: Smart Mode, High Speed, Low Speed and Off. Smart sensors monitor ambient and LED temperatures and adjust fan speed automatically.

• High Speed Mode: Boosts heat dissipation for high-temperature environments.
• Low Speed Mode: Limits noise for on-set recording with a maximum output of 50% in this mode.
• Off Mode: Shuts down the fan to minimize noise; maximum output is limited to 10% when the fan is off.

Compact construction and practical accessories

The Evoke 1200B uses aluminum die-cast alloy construction to remain compact and durable. The bare light weighs 7.75 kg, which the manufacturer notes is approximately 70% of a 1.8K HMI, offering improved transportability while retaining intensity.

Standard cabling includes a 7.5 m DC cable. Optional connection cables of 10 m and 12 m are available to extend power supply distance. The self-locking connector ensures quick and secure connections. The kit also ships with a quick release super clamp and an offset yoke with a 15° tilt allowance for greater tilting range when using softboxes and other accessories.

What’s included in the kit

• Evoke 1200B×1
• Yoke×1
• FL-35YK Fresnel Lens
• Flight Case
• Power Adapter×1
• RF-NLM-45 Reflector×1
• Connecting Cable 7.5M×1
• WS-RC-C2 Wireless Controller
• Power Cable 6M×1
• AS-CP-QR-EV Quick Release Clamp×1
• USB Flash Drive×1
• User Manual×1
• DMX Reference Guide×1
• Thank You Card×1

Technical specifications

FAQ

• Question: How bright is the Evoke 1200B compared to traditional HMI lights?
  Answer: The Evoke 1200B produces 61.030 lux @ 3m, 5600K (with reflector) and is stated to outperform a 1.8K HMI Par or a 2.5K fresnel in practical output.
• Question: Can I change color temperature without losing intensity?
  Answer: Yes. The fixture offers a 2700K–6500K bi-color range with constant output functionality, so you can adjust CCT without intensity shifts.
• Question: Is the Evoke 1200B suitable for outdoor use in adverse conditions?
  Answer: The fixture and its power supply are rated IP54, providing protection against dust and water spray, making it suitable for many outdoor conditions like rain or snow.
• Question: What wireless and wired control options are available?
  Answer: You can use built-in LumenRadio TimoTwo for wireless mesh transmission and reception, the NANLINK app via 2.4G or Bluetooth, or wired control via the onboard 5-pin XLR DMX port and the lamp head wire control port.
• Question: How does the fan system affect noise and output?
  Answer: The Evoke 1200B has four fan modes (Smart, High Speed, Low Speed, Off). Low Speed limits noise and caps output at 50%, while Off minimizes noise and caps output at 10%. Smart mode adjusts fan speed automatically based on temperature.
• Question: What accessories are included in the kit?
  Answer: The kit includes the Evoke 1200B, Yoke, FL-35YK Fresnel Lens, Flight Case, RF‑NLM‑45 Reflector, power adapter and cables, wireless controller, quick release clamp, USB drive, manuals and more. See the complete in‑box list above for details.

If you need additional details or want to source optional cables or accessories, contact us and we will help integrate the Evoke 1200B into your production workflow.