Nanlux Evoke 1200B Spot Light with Flight Case

NANLUX Evoke 1200B Spot Light with Flight Case – High Output Bi‑Color LED for Film & TV Production

This kit includes the Evoke 1200B spot light and a dedicated flight case. It targets cinematographers and gaffers working in film and TV production who need a powerful, flexible bi‑color LED fixture that is built for professional use.

High output and practical performance

The Evoke 1200B delivers extreme light efficiency, measured at 61.030 lux @ 3m at 5600K when used with the RF‑NLM‑45 reflector. It outperforms conventional fixtures in comparable categories, offering output comparable to larger lamp types such as 1.8K HMI Par or a 2.5K fresnel while remaining an LED solution.

The fixture includes a proven flicker‑free function and the same constant output behaviour found across the Nanlux Evoke line. This ensures stable light for motion capture and high‑speed filming without unexpected flicker or intensity shifts during CCT changes.

Wide bi‑color range and accurate color rendering

The Evoke 1200B supports a broad CCT range from 2700K to 6500K. You can adjust color temperature smoothly at the turn of a knob to simulate conditions from sunrise through daylight to sunset, eliminating the need for CTO/CTB gels.

• CRI: Average 96
• TLCI: Average 97

The unit has undergone professional testing and calibration for continuity and color accuracy. In addition, a constant output mode preserves intensity during CCT tuning so color changes do not cause a visible drop or rise in brightness.

Rugged design and weather protection

The Evoke 1200B uses a hermetically sealed structure rated IP54. This whole‑fixture rating, including protection for the power supply, helps the light operate reliably in rain, snow, dust, or sandstorm conditions encountered on location.

Precise control and smooth dimming

Nanlux equips the Evoke 1200B with a clear 2.8‑inch display and a simplified, intuitive menu interface that is familiar to users of Nanlux and Nanlite fixtures. Dimming is highly accurate, adjustable from 0–100% in 0.1% increments to eliminate sudden jumps at very low outputs.

The fixture offers five selectable dimming curves for industry‑standard behaviour and precise control over light response:

• LINEAR
• EXPONENT
• LOGARITHM
• S CURVE
• GAMMA 2.2

Comprehensive wired and wireless connectivity

The Evoke 1200B provides multiple control options to integrate into varied on‑set workflows. You can use wired DMX via the onboard 5‑pin XLR, or benefit from wireless control with the built‑in LumenRadio TimoTwo module.

• LumenRadio TimoTwo: Built‑in transmit and receive functions enable stable wireless mesh connections between fixtures.
• NANLINK App: Connects through built‑in 2.4G or Bluetooth for accurate, professional control from mobile devices.
• DMX / RDM: Hardwired control via the on‑board 5‑pin XLR provides stable console integration.
• Wire control: The lamp head includes a port for a wired controller as an alternative on‑set control method.

Thermal management and fan modes for varied shooting needs

Thermal management was a major focus in development. Nanlux implemented an efficient heat dissipation system to optimize LED lifetime and maintain compact fixture dimensions. The Evoke 1200B uses smart sensors to monitor LED temperature and adjust fan behaviour in real time.

The enhanced fan control system supports four operation modes so you can match thermal and acoustic requirements to specific shooting scenarios:

• Smart Mode: Fans adjust automatically based on temperature to balance cooling and noise.
• High Speed Mode: Maximises heat dissipation for demanding high‑temperature conditions.
• Low Speed Mode: Limits noise for on‑set recording while still discharging heat; maximum output is 50% in this mode.
• Off Mode: Fans shut down to minimise noise for optimal sound recording conditions; maximum output is 10% in this mode.

Compact structure, transportability and rigging

The Evoke 1200B inherits the Evoke family’s structural design and uses aluminum die‑cast alloys for the housing. The bare light weighs 7.75 kg, which the product notes is about 70% of a 1.8K HMI, helping with transport and handling while retaining required intensity on set.

Controls are located on the lamp head for quick access. Standard accessories and connector options support rapid deployment:

• Standard 7.5 m DC connecting cable included; 10 m and 12 m options available
• Self‑locking connector for quick and secure power connections
• Quick release super clamp and offset yoke included for fast lamp head swapping and secure power supply mounting
• New offset yoke design offers a 15° tilt increase for better compatibility with soft boxes and other light‑shaping accessories

What’s included in the kit

• Evoke 1200B
• Flight Case
• Yoke
• Power Adapter
• RF-NLM-45 Reflector
• Connecting Cable 7.5M
• WS-RC-C2 Wireless Controller
• Power Cable 6M
• AS-CP-QR-EV Quick Release Clamp
• USB Flash Drive
• User Manual
• DMX Reference Guide
• Thank You Card

Technical specifications

FAQ

Question: Is the Evoke 1200B suitable for outdoor shoots where weather is unpredictable?
Answer: Yes. The whole fixture and its power supply are rated IP54 with a hermetically sealed structure, designed to withstand rain, snow and dust in field conditions.

Question: How can I control color temperature and dimming on set?
Answer: You can change CCT smoothly from 2700K to 6500K using the onboard knob and 2.8‑inch display. For remote control use wired DMX via the 5‑pin XLR, the built‑in LumenRadio TimoTwo wireless module, the NANLINK App (2.4G/Bluetooth), or the wired lamp‑head control port.

Question: What fan modes are available and how do they affect output and noise?
Answer: The fixture offers Smart, High Speed, Low Speed and Off modes. Smart mode adapts automatically for a balance of cooling and noise. High Speed maximises heat dissipation. Low Speed reduces noise and limits maximum output to 50%. Off mode stops fans for the quietest recording environment and limits output to 10%.

Question: What is included in the flight‑case kit?
Answer: The kit ships with the Evoke 1200B, flight case, yoke, power adapter, RF‑NLM‑45 reflector, 7.5 m connecting cable, WS‑RC‑C2 wireless controller, 6 m power cable, AS‑CP‑QR‑EV quick release clamp, USB flash drive, user manual, DMX reference guide and a thank you card.