Nanlux Evoke 2400B Spot Light in Flight Case with 45° Reflector in soft bag

Nanlux Evoke 2400B Spot Light – 2400W Output with 45° Reflector in Flight Case

The Nanlux Evoke 2400B bundles a high-output LED spot light with a 45° reflector (stored in a soft bag) and a protective flight case. This package includes the lamp head, power supply, yoke, remote controller and all required cables and accessories for professional film and video production. The Evoke 2400B targets productions that need high output, flexible color control and rugged, weather-resistant hardware.

High output and efficient LED performance

The Evoke 2400B delivers intense light output while consuming 2400W of rated power. Nanlux quotes an output of 41,910 lux at 3 meters when used with the supplied 45° reflector at 5600K. As an LED fixture, it provides the benefits of instant-on performance, flicker-free operation and wide dimming without the preheat or cool-down delays associated with some traditional light sources.

• Output: 41,910 lux@3M (with a 45° reflector / 5600K)
• Rated Power: 2400W
• CCT Range: 2700K-6500K

Green–Magenta control across the CCT range

Nanlux integrates an advanced Green–Magenta adjustment (G/M) to keep color consistent across the CCT range. Instead of relying solely on two-chip bi-color mixing, the Evoke 2400B adds a G/M ±80 △uv adjustment so you can match other fixtures or fine-tune the image. This helps avoid the magenta or green shifts that can appear in the middle or at the extremes of the color range and gives you creative control to alter skin tones or set atmospheres.

In addition to the G/M auto-calibration, the expanded G/M range supports accurate matching to fixtures from other manufacturers and streamlines color consistency for multi-source setups and post-production workflows.

True-to-life color rendition metrics

Nanlux has tuned the Evoke 2400B for high color fidelity and accurate saturation. The published averages and indices show the fixture’s performance across industry-standard metrics, helping you understand expected color quality in professional shooting environments.

• CRI Average: 96
• TLCI Average: 97
• TM-30 Rf Average: 95
• TM-30 Rg Average: 100
• SSI (3200K): 84
• SSI (5600K): 74

Lightweight, durable construction with IP55 protection

The Evoke 2400B uses magnesium alloy in its construction to achieve an efficient strength-to-weight ratio. Both the lamp head and the power supply carry an IP55 weather-resistance rating, making the system suitable for use in challenging or unpredictable environments. Nanlux highlights a notably lighter lamp head compared with traditional fixtures of similar output.

Nanlux provides the following weight detail as a point of comparison: the lamp head weighs 15 kg (33 lbs), which the company states is approximately 25% lighter than a traditional HMI of comparable brightness. The power supply also increases only modestly in weight compared with smaller models in the Evoke family.

Control options: local, wired and wireless

The Evoke 2400B offers a comprehensive set of control methods to fit studio rigs and on-location workflows. You can operate the fixture directly from the integral controls or choose several wired and wireless protocols for remote operation and integration into larger lighting systems.

On-fixture controls include four buttons, three knobs and a 3.5-inch LCD screen. The interface supports fine brightness adjustment in 0.1% increments and a quick toggle to switch brightness between 0.0% and the currently set dimming position via a short press of the knob.

Wired control and network protocols

The Evoke 2400B supports multiple wired protocols for professional control:

• Wire Controller — the lamp head has a dedicated wire controller port to accept wired control communication via a compatible wired controller (controller development in progress).
• DMX/RDM — a 5-pin XLR DMX in & out port enables DMX/RDM control from lighting consoles for stable, accurate group control in film and television systems.
• Art-Net/sACN — two LAN ports support Ethernet control via Art-Net or sACN, allowing longer transmission distances and multi-universe management compared with traditional DMX cabling.

Wireless and CRMX compatibility

The Evoke 2400B includes built-in 2.4G and Bluetooth modules for wireless control via the NANLINK app. In addition, it supports LumenRadio CRMX through the TimoTwo module, allowing it to transmit or receive CRMX signals and interoperate with other fixtures that use wireless DMX solutions.

• NANLINK APP — quick wireless control using the built-in 2.4G and Bluetooth modules.
• LumenRadio — CRMX support via the TimoTwo module for wireless DMX interoperability.

Intelligent cooling and low-noise operation

The Evoke 2400B uses an adjustable cooling system with four fan modes to balance thermal management, output and acoustic requirements. This system aims to reduce the audible impact of the fixture during sound-sensitive shoots while still providing reliable heat dissipation.

Nanlux notes a noise level of 29 dBA in SMART mode, and the unit provides clear mode behaviors to match production needs.

• In SMART mode, the fan speed automatically adjusts based on ambient temperature.
• FULL SPEED mode allows full power output.
• LOW SPEED mode limits power output to 50%.
• OFF mode limits power output to 15%.

Technical specifications

Included in the box

The package includes the Evoke 2400B and the accessories needed to deploy it on set. Each listed item is supplied with the fixture as standard.

• Evoke 2400B ×1
• RF-NLM-45-EV2400 Reflector 45° with soft bag x1
• Yoke ×1
• Power Supply ×1
• USB Drive ×1
• AS-CP-QR-EV Quick Release Clamp ×1
• CC-EV2400-FT-FO Flight Case ×1
• WS-RC-C2 Remote Controller ×1
• DC Connection Cable 7.5m ×1
• AC Power Cable 3m ×1
• User Manual ×1

FAQ

Question: What control methods does the Evoke 2400B support?
Answer: The fixture supports on-unit controls (buttons, knobs and a 3.5-inch LCD), a wire controller port, DMX/RDM via 5-pin XLR, Art-Net/sACN over two LAN ports, NANLINK wireless control via built-in 2.4G and Bluetooth, and CRMX through the LumenRadio TimoTwo module. These options cover local, wired and wireless workflows for studio and location use.

Question: Can I match this light to other fixtures on set?
Answer: Yes. The Evoke 2400B includes an extended G/M ±80 △uv adjustment across its CCT range, enabling color matching to other fixtures and finer creative tweaks to skin tones or scene atmosphere without relying solely on bi-color mixing.

Question: How quiet is the fixture during interviews or sound-sensitive shoots?
Answer: The Evoke 2400B uses an adjustable four-mode cooling system. In SMART mode the unit runs at about 29 dBA, with LOW SPEED and OFF modes available when you need to reduce noise further—each mode comes with defined power output limits to balance light output and acoustic requirements.

Question: Is the Evoke 2400B suitable for outdoor use?
Answer: The lamp head and power supply are rated IP55, providing protection against dust ingress and water jets, which supports use in challenging environments. Always follow standard safety procedures and mounting practices for outdoor applications.

Question: What is included with the Evoke 2400B that helps with transport and protection?
Answer: The package ships with a dedicated flight case (CC-EV2400-FT-FO) and a 45° reflector in a soft bag, plus a quick release clamp and other accessories, so the system is ready for transport and deployment on location.